Cold Water Meter Sensus 2 Inch WPDynamic


Cold Water Meter Sensus 2 Inch WPDynamic 50 °C is a bulk water meter for the measurement of high, relatively constant flow rates, e.g. behind pumps. It is available in sizes DN 40 to DN 400.

Main Characteristics :

  • Hermetically sealed register (IP 68)
  • Patended hydrodynamically balanced rotor ( ≤DN 300)
  • Patended symmetrical calibration adjustment ( ≤DN 300)
  • Register may be rotated through 360°
  • High overload capability
  • Pattern approved removable measuring element
  • Powder coating affords maximum corrosion protection
  • Not affected by external magnetic fields

Applications :

Cold Water Meter Sensus 2 Inch WPDynamic Measurement of high, relatively constant flow rates, e.g behind pumps

Available Options :

  • Up to 3 pulsers (1 x OD, 2 x RD) may be fitted without breaking the approval seal.
  • 1/4″ connection port for pressure sensors
  • May be equipped with 3 different electronics register

Performance Data WP-Dynamic 50 °C

  • Nominal Diameter : DN 50
  • (Qmax) Max. Peak Flow once in life time 24 h Qmax or 5 Min. 1,2 x Q max (±2%) : 90 m³/h
  • (Qn) Continuous Flow (±2%) : 50 m³/h
  • Transitional flow (±2%) : 0.7 m³/h
  • Minimum Flow : (±5%) : 0.30 m³/h
  • (Qmin) Starting flow : 0.15 m³/h

Material :

Cold Water Meter Sensus 2 Inch WPDynamic

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories

LOKASI

Copy Protected by Chetan's WP-Copyprotect.