Description
- Clean or slightly contaminated low viscosity liquids without solid & fibrous particles.
- Horizontal ring section, multistage, centrifugal pumps with closed impellers and diffusers in end suction design.
- 7 models from DN 40 up to DN 150 discharge flange diameter.
- Discharge flange is on top for standard production, upon request different discharge flange positions can be produced.
- Bearings of SKM-E type pumps are grease lubricated. Sleeve bearing used in the suction side is lubricated by the pumping liquid.
Specifications
Discharge Flange : DN 40…..DN 10 mm
Capacity : Up to 400 m3/h
Head : Up to 450 m
Speed : Up to 2900 rpm
Operating Temperature : -100C up to +1400C
Casing Pressure ( Pmax ) : 250 bar ( 63 bar )
Material
Cast Iron, ductile cast iron, stainless stell, duplex or bronze.
Shaft Sealing
Soft packing seal or mechanical seal.
Rotation
Direction of rotation is counter clockwise viewed from drive end.
Certification
EN ISO 9905, CE, GOST-R, ATEX
