Wastewater Submersible Pumps HCP 50AFU4.4


FEATURES :

  • International standard design : Epoxy Resin Sealed Cable, Auto Cut (MTS : Miniature Thermal Sensor Equip to >15HP model), dry motor, silicon carbide mechanical seal, high grade cast iron offering highest quality and performance.
  • P/U/C/E mutiple impellers designed to handle sewage solids and/or fibrous substances
  • Double Mechanical Seal : Superior abrasion resistant mechanical seal manufactured with silicon carbide to ensure the best seal effect.
  • Mehanical seal bracket designed with Oil Elevating Chip to enhance the lubriant, and extend the lifetime of the Mechanical Seal
  • Full range offering low to high head and flow capabilities, with compact and easy installation. Also, available with Guide Rail System, which allows automatic remote connection and disconnection without entering the pit.
  • AFC pump is designed with 6 lobes input, equipped with double tugsten blade; with can strongly cut off the foreign materials and avoid  the impeller clog.

APPLICATION

  • Drainage of waste water from the attenuation tank, purifying tank and sewage tank in water treatment plant.
  • Drainage of waste water containing fibrous additives from leather factory, dyeing factory and food processing factory. Sewage management, accumulated water, septic tank stock farm
  • Pumping sewage from hotels, restaurants schools and public buildings
  • Sewage management, accumulated water, septic tank, stock farm.

SPECIFICATION PRODUCT :

Model AF
Discharge (mm)  50 • 80 • 100
Limits of Use Liquid Temp. 0 ~ 40°C (32 ~ 104°F)
Applications Residential wastewater
Sewage
Submersion Depth 30m (100 feet)
Limits of Use Frequency 50 Hz
Motor 2 P (3000 RPM) • 4 P (1500 RPM) •Dry Motor
Insulation Class B (0.5~3HP) • Class F (5~10HP)
Protection IP68
Protector Auto-Cut
Bearing Ball Type
M.seal Double M.Seal
Impeller Semi-open (P/U)Enclosed-channel (E)
Material Upper Cover FC-200
Motor Frame FC-200
Shaft End SUS410 (2P : 0.5~1HP)SUS403 (2P:2~10HP • 4P:0.5-5HP)SUS420J2 (4P:7.5 ~10 HP)
M.seal Upper : Carbon/CeramicLower : Silicon/silicon
Casing FC-200
Impeller FC-200
Cable VCT or H07RN-F or SJOW/SOW

SPECIFICATION PERFORMANCE

Model : 50AFU4.4

HP (kW) : 1/2 (0.4)

Discharge Inch (mm) : 2″ (50)

Phase : 1 and 3

Start Method : Capacitor and Direct

Head : 3.5 m

Capacity : 0.25 m³/min

Capacity : 15 m³/h

Solid Passage : 50 mm

Weight 1 ø : 30  kg

Weight 3 ø : 28 kg

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories

LOKASI

Copy Protected by Chetan's WP-Copyprotect.