Detail Lutron CB-933 Cable Tester * Transmitter :
- Display : Two red LED lamps
- Power : DC 9V battery, Alkaline type, 006P, MN1604 ( PP3 ) or equivalent.
- Power current : 2 mA
- Alligators : 17 alligators, grees x 16, black x 1
- Dimensions : 125x70x26.5 mm
- Weight : Approx. 355 g/ 0.77 LB
- Housing : High impact ABS plastic.
* Receiver :
- Display : 14 mm seven segment LED, 2 digits, one red LED lamp
- Power : DC 9V battery, Alaline type, 006P, MN1604 ( PP3 ) or equivalent.
- Power current : 33 mA
- Alligators : 2 alligators, red x 1, black x 1
- Dimensions : 125x70x26. mm
- Weight : Approx. 355 g/ 0.77 LB
- Housing : High impact ABS plastic.
* Cable resistance : 25 K ohm, max
* Accessories :
- Transmitter with 17 cables and alligators ( 1 PC )
- Receiver with 2 cables and alligators ( PC1 )
- Operation manual x 1 PC
* Application : To identify and trace up 16 cores in multi-way cable. It can also be connected to heating and the water supply installation system for this purpose.
OPERATION :
1. At the end of the cable, connect one of the transmitter terminals marked ” CH1 to CH16 ” to each core of the cable under test.
2. Connect the ” COM ” reference lead of transmitter to a core which is the only known one. At the other end of the cable, connect the ” COM terminal” ( black alligator ) of the transmitter is also connected . When the ” input terminal” ( red alligator ) of the receiver is successively touched on the cores of the cable under test, the relevant number of the way is indicated on the dispay of receiver ( 1-16 )
