Category: YAMADA PUMP


Available in 1-1/2″, 2″, and 3″ port sizes, XDP pumps are built on the liquid platform of a standard  ( pneumatically-actuated ) NDP Series pump. but with a mechanically-actuated air motor. Air power is conserved by actuating tha air valve Read more…


Designed for Food, Pharmaceutical & cosmetic Industries. Pumps include: 316 Stainless Steel wetted components with passivated satin finish, PTFE-Coated Air Motor*, Sanitary Clamp Fittings, and FDA compliant elastomers: Hytrel®, EPDM and PTFE. Key Features Self-priming, lube-free air valve Excellent for Read more…


Specifically designed to move bulk solids more effectively throughout your process. They are a cost effective replacement for Augers and conveyors and eliminate unsafe and labor intensive means of moving bulk powders. These heavy duty pumps consistently transfer fine-grained ( Read more…


By utilizing one pump, Yamada offers a design in which the inlet and outlet ports can be configured to multiple combinations; ideal for pumping or combining two similar specific gravity fluids. For instance, a dual suction/single discharge split manifold pump Read more…


The flow rate is roughly half of the equivalent size pump output, though a maximum discharge pressure of 200 PSI can be achieved with only 100 PSI air inlet pressure supplied. The 2:1 discharge ratio is achieved by applying air Read more…


Flap valve Pump design to pump large solids. The New Yamada Flap Valve Pump was designed and engineered to address the problems normally associated with flap valve pumps. I.e. Normally due to severe working conditions, there is often a need Read more…


Manufacturer has distinct design advantages that make them very versatile and cost effective drum pumps. Models are available in Polypropylene, PVDF ( Kynar® ), Aluminium and Stainless Steel which includes a 2″ bung adapter and 33″ suction tube. Available in Read more…


215 Gallons/Minute ( 800 LPM Max ) 3″ Fluid Port ( NPT or ANSI Flange ) INTAKE & DISCHARGE CONNECTIONS Polypropylene ( PPG ) * 3″ ANSI Flange B16.5 #150 Aluminium ( ADC-12 ) * 3″ ANSI Flange B16.5 #150 Read more…


164 Gallons/Minute ( 600 LPM Max ) 2″ Fluid Port ( NPT or ANSI Flange ) INTAKE & DISCHARGE CONNECTIONS Polypropylene ( PPG ) * 2″ ANSI Flange B16.5 #150 Kynard® ( PVDF ) * 2″ ANSI Flange B16.5 #150 Read more…


107 Gallons/Minute ( 400 LPM Max ) 1-1/2″ Fluid Port ( NPT or ANSI Flange ) INTAKE & DISCHARGE CONNECTIONS Polypropylene ( PPG ) * 1-1/2″ ANSI flange B16.5 #150 Kynard® ( PVDF ) * 1-1/2″ ANSI Flange B16.5 #150 Read more…

LOKASI

Copy Protected by Chetan's WP-Copyprotect.