SDM3045X Digital Multimeter


SDM3045X Digital Multimeter SIGLENT is a 4½ digit (66,000 count) multimeter incorporating a dual-display and is especially well suited for the needs of high-precision, multifunction and automatic measurement applications.

Application Of SDM3045X Digital Multimeter :

  • Research Laboratory
  • Development Laboratory
  • Detection and Maintenance
  • Calibration Laboratory
  • Automatic Production Test

Key Features

  • Real 4.5 digit readings resolution
  • Up to 150 rdgs/s measurement speed
  • True-RMS AC Voltage and AC Current measuring
  • 1 Gb Nand flash size , Mass storage configuration files and data files
  • Built-in cold terminal compensation for thermocouple
  • With easy, convenient and flexible PC software: Easy SDM
  • Standard interface: USB Device, USB Host, LAN
  • Supports remote control via commands and compatible with commands of main stream multimeters

 

Measuring Method and other characteristics

DC Voltage
Input Resistance 600 Mv                                       10 MΩ or 10 GΩ selectable
6 V, 60 V, 600 V and 1000 V Range    10 MΩ ± 2%
Input Bias Current <90 Pa, 250C
Input Protection 1000 V on all ranges
CMRR 120 Db ( For the 1 KΩ unbalanced resistance in LO lead, max ±500 VDC
NMRR 60 Db at “slow” measurement rate
Resistance  
Testing Method 4-wire resistance or 2-wire resistance selectable
Input Protection 1000 V on all ranges
DC Current  
Shunt Resistor 600µA sampling voltage < 33 mV
6 mA sampling voltage < 0.33 V
1 Ω for 60 mA, 600 mA 1Ω
0,01 Ω for 6 A, 10 A
Input Protection Rear panel : accessible 10 A, 250 V fast-melt fuse
Internal: 12 A, 250 V slow-melt fuse
Continuity/ Diode Test  
Measurement Method 1 Ma ± 5% constant-current source or open – circuit voltage
Beeper Yes
Continuity Threshold Adjustable
Input Protection 1000 V
True-RMS AC Voltage  
Measurement Method ac Coupled True RMS measure – up to 1000 V DC bias are permitted on every range
Wave Crest Factor ≤3 at full scale
Input Impedance 1 MΩ ± 2%  in parallel with <100 pF on all ranges
AC Filter Band with 20 Hz   ̴ 100 KHz
CMRR 60 dB ( for the 1Ω imbalance resistance among lo lead an <60  Hz, Max ±500 VDC )
True RMS AC Current  
Measurement Method DC Coupled to the fuse and shunt; AC coupled the true-RMS measurement ( measure the AC components only )
Wave Crest Factor ≤3 at full scale
Max Input <10 A ( include DC Component )
Shunt Resistor 1Ω for 60 mA , 600 mA 1 Ω fot 6 A, 10 A
Input Protection Rear panel : accessible 10 A, 250 V fast-melt fuse
Internal: 12 A, 250 V slow-melt fuse
Frequency/Period  
Measurement Method Reciprocal-counting technique, AC Coupled the True-RMS measurement ( Measures the AC components only )
Measurement Attentions Error are leaded into all frequency counters when measuring low voltage or low frequency signal
Capacitance Measuring  
Measurement Method Measure the rate of change of voltage generated during the current flowing the capacitance
Connection Type 2-wire
Input Protection 1000 V on all ranges
   
Order Information  
Product name SIGLENT SDM3045X Digital Multimeter
Models SDM3045X
Standard Accessories A power Cord that fits the standard of destination country
  Two Test Leads, Two Alligator Clips
   
Order Information  
Models SDM3045X
Standard Accessories A power Cord that fits the standard of destination country
Two Test leads, Two Alligator Clips
A USB Cable
A Quick Start
A Guaranty Card
A CD ( Including Easy SDM computer software system )
SDM3045X Digital Multimeter

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories

LOKASI

Copy Protected by Chetan's WP-Copyprotect.