Nocchi Priox 250/8M AUT are constructed in 100% AISI 304 stainless steel. They operate entirely immersed in the pumped liquid, which serves to cool the motor from the exterior. Designed with retracted impeller and vortex operation. Automatic version ( aut ) equipped with float switch
Applications Of Pompa Nocchi Priox 250/8M AUT :
- All applications for lifting and draining waste water with suspended solid bodies.
- Lifting stations with one or more pumps for agricultural and civil complexes.
Application Data
- Type Of Liquid : Waste and Sewage water with solid bodies
- Maximum liquid temperature : 400C
- Maximum immersion below water level : 7 m
- Minimum drainage level : 60 mm ( on manual version )
- Free transit of solid bodies : 40 mm; 50 mm ( PRIOX 600/13 – PRIOX 800/18 )
Materials
- Pump Body : Stainless steel X5 CrNi 1810 ( AISI 304 )
- Suction base : Stainless Steel X5 CrNi 1810 ( AISI 304 )
- Impeller : Cast Stainless Steel X5 CrNi ( AISI 304 )
- Delivery Port : Threaded
- Power Cable : 10 m H07 RN-F with plug
- Motor Shaft : Stainless Steel CrNiS 1809 ( AISI 416 )
- Mechanical Gasket : Silicon Carbide
- Counter face : Silicon Carbide
- Secondary Seal : Lip Seal in rubber NBR
- V-ring sand guard : Rubber NBR
Motor
- Dry Motor
- Protection rating IP 68
- Insulation class F
- Single phase power supply with permanently activated capacitor and thermal cutout protection incorporated in the motor winding.
- Fully insulated cable connection chamber
- Self-lubricating ball bearings.
- Rotation speed : 2850 rpm
Specifications
- Motor Output : 0.75 HP, 0.55 kW
- Power Motor : 1.1 HP, 0.8 kW
- 1-230 Volt
- DNM : 1 1/2″
- Weight : 9.4 kg
