Pompa Nocchi Priox 460/13 T


Pompa Nocchi Priox 460/13 T are submersible drainage pumps designed for stationary and portable installation these single-stage pumps are completely constructed in 100 % AISI 304 stainless steel. PRIOX pumps are designed with vortex impeller with a free passage of 40 mm and 50 mm. They operate entirely immersed in the pumped liquid which serves to cool the motor from exterior. They are available in either single phase or three phase versions and for 50 Hz power.

Applications Of Pompa Nocchi Priox 460/13 T :

  • All application for lifting and draining waste water with suspended solids and fibers, with free passage of 40 mm and 50 mm, EN 12050-2 compliant.
  • Pump stations with one or more pumps for agricultural and civil complexes.
  • Drainage of flooded cellars
  • Groundwater lowering
  • Effluents from showers, washing machines and sinks below sawer level.
  • Emptying of drain wells.

Application Data

  • Type of Liquid : waste and sewage water with solid bodies.
  • Maximum liquid temperature : 400C
  • Maximum immersion below water level : 7 m
  • Minimum drainage level 60 mm ( on manual version )
  • Free transit of solid bodies : 40 mm; 50 mm ( PRIOX 600/13 – PRIOX 800/18 )

Motor

  • Dry Motor
  • Protection rating IP 68
  • Insulation class F
  • Single phase power supply with permanently activated capacitor and thermal cutout protection incorporated in the motor winding.
  • Fully insulated cable connection chamber
  • Self- lubricating ball bearings
  • Rotation speed 2850 rpm

Specifications

  • Pump Body : Stainless steel X5 CrNi 1810 ( AISI 304 )
  • Suction base : Stainless steel X5 CrNi 1810 ( AISI 304 )
  • Impeller : Cast stainless steel X5 CrNi 1810 ( AISI 304 )
  • Delivery port : Threaded
  • Cover : Cast stainless steel ( Priox 800/18 )
  • Power cable : 10 m H07 RN-F with plug
  • Motor shaft : Stainless steel X5 CrNiS 1809 ( AISI 416 )
  • Mechanical gasket : Silicon carbide
  • Counter face : Silicon carbide
  • Secondary seal : Lip seal in rubber NBR
  • V-ring sand guard : Rubber NBR
  • Motor Output : 1.4 HP, 1 kW
  • Power Motor : 2 HP, 1.45 kW
  • 3-400 Volt
  • DNM : 2″
  • Weight : 11.7

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories

LOKASI

Copy Protected by Chetan's WP-Copyprotect.