POMPA CALPEDA NM 50/16A/B


Construction

Close-coupled centrifugal pumps; electric motor with extended shaft directly connected to the pump up to 22 kW, new bracket construction for standard motors ( stub-shaft construction ) from 30 to 75 kW with integrated thrust bearing.

Pump casing with axial suction and radial delivery on top, main dimensions and performance according to EN 733.
NM(S): version with pump casing and lantern bracket in cast iron.
B-NM(S): version with pump casing and lantern bracket/casing cover in bronze.  ( the pumps are supplied fully painted ).
Connections : Flanges according to PN 10, EN 1092-2.
Counter-flanges ( on request ) : Screwed flanges EN 1092-1, PN 16

Applications

For clean liquids without abrasives, which are non-aggressive for the pump materials ( solids content up to 0,2%). For water supply.
For heating, air conditioning, cooling and circulation plants.
For civil and industrial applications.
For fire fighting applications. For Irrigation.

Operating conditions

  • Liquid temperature from -10 °C to +90 °C
  • Ambient temperature up to 40° C.
  • Total suction lift up to 7 m.
  • Maximum permissible working pressure up to 10 bar ( 16 bar for NM 32L/16,20; NM 40/16,20; NM 50/12,16; NM 65/12,16,20,25; NM80/16; NM 100/20).
  • Continuous duty.

Motor

  • 2-pole induction motor, 50 Hz (n ≈ 2900 rpm).
  • NM, NMS: three-phase 230/400 V ±10% up to 3 kW;
    400/690 V ±10% from 4 up to 75 kW.
  • Insulation class F.           Protection IP 54 ( IP 55 For NMS )
  • Motor suitable for operation with frequency converter from 1,1 kW.
  • Classification scheme IE3 for three-phase motors from 0,75 kW.
  • Constructed in accordance with: EN 60034-1; EN 60034-30-1

Special features on request

  • Other voltages.  – Frequency 60 Hz ( as per 60 Hz data sheet ).
  • Protection IP 55. – Special mechanical seal.
  • Packed gland ( only for NM standard construction ).
  • Single-phase motor (NMM) up to 1,5kW.
  • Higher or lower liquid or ambient temperatures.
  • Motor suitable for operation with frequency converter up to 0,75 kW.

Materials

Components NM, NMS B-NM, B-NMS
Pump casing
Lantern bracket NM
Casing cover for NMS
Cast Iron
GJL 200 EN 1561
Bronze
G-Cu Sn 10 EN 1982
Lantern bracket NMS Cast Iron GJL 200 EN 1561
Impeller Cast Iron
GJL 200 EN 1561
Bronze
G-Cu Sn 10 EN 1982
Brass P-Cu Zn 40 Pb 2 UNI 5705
For 32/12, 32/16, 32/20, 32L/20, 40/20
Shaft Cr-Ni steel AISI 303
AISI 430 from 3 kW to 22 kW
Cr Ni Mo steel
AISI 316
Mechanical seal Carbon-Ceramic-NBR
Counter-flanges Steel Fe 4308 UNI 7070

Specifications

  • Rated motor power output : 7.5 kW, 10 Hp
  • Maximum suction lift 1-2 m.
  • Kapasitas Pompa ( Q ) : Total Head ( H )
    30 M3 ( 500 l/min ) : 38.5 m
    33 M3 ( 550 l/min ) : 38 m
    37.8 M3 ( 630 l/min ) : 37.5 m
    42 M3 ( 650 l/min ) : 36.5 m
    48 M3 ( 700 l/Min ) : 34.5 m
    54 M3 ( 900 l/Min ) : 32.5 m
    60 M3 ( 1000 l/Min ) : 30 m
    66 M3 ( 1100 l/Min ) : 27  m
    69 M3 ( 1150 l/Min ) : 25.5  m
    72 M3 ( 1200 l/Min ) : 24 m
    75 M3 ( 1250 l/Min ) : 22.5 m
    78 M3 ( 1300 l/Min ) : 20.5 m
    81 M3 ( 1350 l/Min ) : 19 m
  • Weight : 80  kg

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories

LOKASI

Copy Protected by Chetan's WP-Copyprotect.