Water Meter 1 Inch Pulsafeeder ( Plastic ) provide value by offering efficient, accurate operation for potable and non-potable water applications. The meters are offered in three body types: Plastic ( potable water ) Low-lead brass ( potable water ) and leaded brass ( non-potable water ). The water meters are available in both totalizing and contacting head type providing a dry contact output proportional to flow and can interface directly with both Pulsafeeder pumps and controllers. A totalizing register dial records flow over a wide range with low head loss.
Features :
- Sensor fastens to lens without removing top
- Calibration plug seal wire for tamper evidence
- Union end couplings for each service
- Factory set pulse rates
- Changing pulse rate requires no specials tools
- Adjustable GPC ( Tools required, see instruction manual for more details )
Applications :
- Plastic Body NSF 61 certified – Residential Water Conditioning and Portable Water
- Brass Lead-Free NSF 61 certified – Municipal, Industrial, Heat Transfer Cooling Tower and Boiler.
Specifications :
- Power Input: 24 Vdc or Vac Max
- Average Current Draw: Multi-Jet Meter: 20 mA Max,
- Accessories
- Boiler Controllers
- Cooling Tower Controllers
- Metering Pumps
- Pre-Engineered Systems
Technical Water Meter 1 Inch Pulsafeeder :
| Connection / Size | 1″ NPT |
| Rating | 75-50 GPM |
| Gallons Per Contact ( GPC ) | Totalizer / Less Reed Switch ( Part Number : MTR-300-P ) 0.1 GPC ( Part Number : MTR-301-P ) 0.25 GPC ( Part Number : MTR-302-P ) I GPC ( Part Number : MTR-304-P ) 1 GPC/ Hall Effect Sensor ( Part Number : MTR-304-P-H ) 1 LPC ( Part Number : MTR-304-P-L ) |
| Power | 6mA at 12 Vdc (Hall Effect Sensor Only |
| Temperature | 105° F (40° C) max |
| Pressure | 150 PSI operating (10.3 Bar |
| Accuracy | ± 1.5% of reading |
| Materials | Body : Plastic or Eco-brass alloy Internals : Engineered thermoplastic Magnet : Alnico Fittings : Lead-free tail piece |
