Double IP Pump Nachi IPH

Double IP Pump Nachi IPH 3.6 to 125.9cm3/rev, 30 MPa.

All the types in this new design (11D) series are installation compatible with the previous design (10D). Note, however, that there is no longer compatibility for some of the seal components between the IPH-3 and IPH-4 sizes and the 3 and 4 sizes.

Features Double IP Pump Nachi IPH

1. Configured with the hig pressure low noise IPH series an IP pumps, these double pumps greatly expand the range of application for the IP pump.
2. A wide selection of pump combinations provides options that are perfect for just about any type of application imaginable.

Specifications

IPH-22B

• Vent Side Discharge Rate ( 1200min-1 No-Load ) : 4.3 to 9.8 l/min
• Shaft Side Discharge Rate ( 1200min-1 No-Load ) : 4.3 to 9.8 l/min
• Min. Revolution Speed : 600 min-1
• Max. Revolution Speed : 2000 min-1
• Operating Pressure
  Rated : 21 MPa ( 214 kgf/cm2 )
  Max : 30 MPa ( 306 kgf/cm2 )
• Required Power at 1200min-1, 21 MPa kW : 7.99

IPH-33B

• Vent Side Discharge Rate ( 1200min-1 No-Load ) : 12.2 to 18.9 l/min
• Shaft Side Discharge Rate ( 1200min-1 No-Load ) : 12.2 to 18.9 l/min
• Min. Revolution Speed : 600 min-1
• Max. Revolution Speed : 2000 min-1
• Operating Pressure
  Rated : 21 MPa ( 214 kgf/cm2 )
  Max : 30 MPa ( 306 kgf/cm2 )
• Required Power at 1200min-1, 21 MPa kW : 15.3