Specification product:
Single Phase ( TOP1-FLOOR )
Power:
KW: 0.25
HP: 0.33
Flow Rate (Q) = m3/h : Total manometric head = metres
0: 7
1.2: 6
2.4: 5
3.6: 4
4.8: 3
6.0: 2
7.2: 1
Flow Rate (Q) = l/min : Total manometric head = metres
0: 7
20: 6
40: 5
60: 4
80: 3
100: 2
120: 1
Ports
Outlet: 1 1/4″
Berat: 4.3 kg
PERFORMANCE RANGE
- Flow rate up to 160 l/min (9.6 m³/ h)
- Head up to 9 m
APPLICATION LIMITS
- 3 m maximum immersion depth
( with a sufficiently long power cable )
- Maximum liquid temperature +40 °C
( Maximum liquid temperature +90 °C)
for a maximum of 3 minutes intermittent service )
- Passage of suspended solids up to Ø 2 mm
- Suction down to 2 mm above ground level
- Continuous service S1
CONSTRUCTION AND SAFETY STANDARDS
The pumps are complete with a 5 m power cable
EN 60335-1 EN 60334-1
IEC 60335-1 IEC 60334-1
CEI 61-150 CEI 2-3
CERTIFICATIONS
Company with management system certified DNV ISO 9001 : QUALITY
ISO 14001 : ENVIRONMENT
INSTALLATION AND USE
The TOP-FLOOR series is suitable for use with clear water that does not contain abrasive particles.
Because of their ability to drain water to a level of 2 millimetres above ground level, they are suitable for use in domestic emergencies where a small area must be drained to the lowest possible level.
PATENTS-TRADE-MARKS-MODELS
- Registered EU Design n. 342159-0011
OPTIONS AVAILABLE ON REQUEST
- pumps without float switch
- Special mechanical seal
- Pumps with a 10 m long power cable:
=> N.B: Standard EN 60335-2-41 states that the power cable must be 10 m long for outdoor
applications
- other voltages or 6o Hz frequency
