Pump HCP 80AFU25.5L use for :
- Drainage of waste water from the attenuation tank, purifying tank and sewage tank in water treatment plant.
- Drainage of waste water containing fibrous additives from leather factory, dyeing factory and food processing factory. Sewage management, accumulated water, septic tank stock farm
- Pumping sewage from hotels, restaurants schools and public buildings
- Sewage management, accumulated water, septic tank, stock farm.
FEATURES Of Pump HCP 80AFU25.5L :
- International standard design : Epoxy Resin Sealed Cable, Auto Cut (MTS : Miniature Thermal Sensor Equip to >15HP model), dry motor, silicon carbide mechanical seal, high grade cast iron offering highest quality and performance.
- P/U/C/E multiple impellers designed to handle sewage solids and/or fibrous substances
- Double Mechanical Seal : Superior abrasion resistant mechanical seal manufactured with silicon carbide to ensure the best seal effect.
- Mechanical seal bracket designed with Oil Elevating Chip to enhance the lubricant, and extend the lifetime of the Mechanical Seal
- Full range offering low to high head and flow capabilities, with compact and easy installation. Also, available with Guide Rail System, which allows automatic remote connection and disconnection without entering the pit.
- AFC pump is designed with 6 lobes input, equipped with double tungsten blade; with can strongly cut off the foreign materials and avoid the impeller clog.
SPECIFICATION PRODUCT :
| Model | AF | |
| Discharge (mm) | 50 • 80 • 100 | |
| Limits of Use | Liquid Temp. | 0 ~ 40°C (32 ~ 104°F) |
| Applications | Wastewater | |
| Sewage | ||
| Submersion Depth | 30m (100 feet) | |
| Type | Frequency | 50 Hz |
| Motor | 2 P (3000 RPM) • 4 P (1500 RPM) •Dry Motor | |
| Insulation | Class B (0.5~3HP) • Class F (5~10HP) | |
| Protection | IP68 | |
| Protector | Auto-Cut | |
| Bearing | Ball Type | |
| M. seal | Double M. Seal | |
| Impeller | Semi-open (P/U)Enclosed-channel (E) | |
| Material | Upper Cover | FC-200 |
| Motor Frame | FC-200 | |
| Shaft End | SUS410 (2P : 0.5~1HP)SUS403 (2P:2~10HP • 4P:0.5-5HP)SUS420J2 (4P:7.5 ~10 HP) | |
| M. seal | Upper : Carbon/Ceramic Lower : Silicon/silicon | |
| Casing | FC-200 | |
| Impeller | FC-200 | |
| Cable | VCT or H07RN-F or SJOW/SOW | |
SPECIFICATION PERFORMANCE
Model : 80AFU25.5L
HP (kW) : 7 1/2 (5.5)
Discharge Inch (mm) : 3″ (80)
Phase : 3
Start Method : Direct
Head : 13 m
Capacity : 0.8 m³/min
Capacity : 48 m³/h
Solid Passage : 76 mm
Weight 3 ø : 70 kg
