Grundfos Pump TP40-190 Grundfos TP (B), (I) pumps with pump housing in bronze or stainless steel and are single-stage, close-coupled in-line centrifugal pumps with mechanical shaft seal and primally for applications such as hot water recirculation. The pumps are fitted with fixed speed motors
APPLICATIONS :
Grundfos Pump TP40-190 close coupled in-line centrifugal pump suitable use for
- Water treatment fertigation, chemigation and dosing
- Controls and digital groundwater management
- Drip, micro spray and soaker hose irrigation
- Frost protection ; Rotor and spray irrigation
- Livestock and wildlife watering, Livestock watering with solar solutions
- Pivot and lateral irrigation
- Agriculture solar solutions
- Solar boosting and water supply solutions
- Ground water transfer
- Commercial air conditioning
- District cooling and heating
- Drinking water treatment
- Irrigation
- Industrial cooling
- Desalination
- Industrial heating Community water solutions
- Municipal solar solutions
- Water distribution
TECHNICAL DATA :
- Liquid:
- Pumped liquid: Water
- Liquid temperature range: 0 .. 140 °C
- Selected liquid temperature: 20 °C
- Density: 998.2 kg/m³
- Technical
- Pump speed on which pump data are based: 2855 rpm
- Rated flow: 10.8 m³/h
- Rated head: 13.3 m
- Actual impeller diameter: 124 mm
- Installation:
- Range of ambient temperature: -30 .. 60 °C
- Maximum operating pressure: 16 bar
- Max pressure at stated temp: 16 bar / 140 °C
- Type of connection: DIN
- Size of inlet connection: DN 40
- Pressure rating for connection: PN 16
- Electrical data:
- Motor type: 80A
- Rated power – P2: 0.75 kW
- Mains frequency: 50 Hz
- Rated voltage: 3 x 220-240D/380-415Y V
- Rated current: 3.30/1.90 A
- Starting current : 580-620 %
- Cos phi – power factor: 0.81-0.71
- Rated speed: 2840-2870 rpm
- IE Efficiency class: IE3
- Motor efficiency at full load: 80.7 %
- Number of poles: 2
- Enclosure class (IEC 34-5): 55 Dust/Jetting
