CENTRIFUGAL PUMP GRUNDFOS TPE3


CENTRIFUGAL PUMP GRUNDFOS TPE3 Series 2000 are single stage pump, close coupled in-line centrifugal pumps with mechanical shaft seal and primely for applications such as heating/ cooling/ district energy. The pumps are fitted with frequency controlled motors and differential pressure transmitter.

CENTRIFUGAL PUMP GRUNDFOS TPE3

APPLICATIONS :

CENTRIFUGAL PUMP GRUNDFOS TPE3 suitable use for Water treatment fertigation, chemigation and dosing ; Controls and digital groundwater management ; Drip, micro spray and soaker hose irrigation ; Frost protection ; Rotor and spray irrigation ; Livestock and wildlife watering ; Livestock watering with solar solutions ; Pivot and lateral irrigation ; Agriculture solar solutions ; Solar boosting and water supply solutions; Ground water transfer; Commercial air conditioning; heating; hot water recirculation; District cooling; District heating; Drinking water treatment; Irrigation; Industrial cooling; Desalination; Industrial heating Community water solutions; Municipal solar solutions; water distribution

TECHNICAL DATA :

  • Liquid:
    • Pumped liquid: Water
    • Liquid temperature range: -20 .. 90 °C
    • Selected liquid temperature: 20 °C
    • Density: 998.2 kg/m³
    • Pump speed on which pump data are based: 2984 rpm
    • Rated flow: 255 m³/h
    • Rated head: 220 m
    • Pump orientation: Vertical
    • Shaft seal arrangement: Single
  • Installation:
    • Maximum ambient temperature: 55 °C
    • Maximum operating pressure: 40 bar
    • Max pressure at stated temp: 25 bar / 90 °C
    • 40 bar / 80 °C
    • Type of connection: DIN
    • Size of inlet connection: DN 200
    • Size of outlet connection: DN 200
    • Pressure rating for connection: PN 40
  • Electrical data:
    • Motor standard: IEC
    • Motor type: SIEMENS
    • Rated power – P2: 200 kW
    • Power (P2) required by pump: 200 kW
    • Mains frequency: 50 Hz
    • Rated voltage: 3 x 380-420D/660-725Y V
    • Rated current: 330/191 A
    • Starting current: 970 %
    • Cos phi – power factor: 0.91
    • Rated speed: 2986 rpm
    • IE efficiency: IE4 96,5%
    • IE Efficiency class: IE4
    • Motor efficiency at full load: 96.5 %
    • Number of poles: 2
    • Enclosure class (IEC 34-5): IP55

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories

LOKASI

Copy Protected by Chetan's WP-Copyprotect.