Ebara 2CDX Centrifugal Pump Dual impeller centrifugal electric pumps with hydraulic parts in AISI 304 and AISI 316 stainless steel, Strong structure, Small dimensions.
The components of the Ebara 2CDX Centrifugal Pump electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability. The process uses a high-pressure fluid (up to 1200 bar) to form the metal. The hydraulic fluid, in our case water, with increasing pressure pushes the stainless steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
APPLICATION :
- Domestic pressure boosting
- Small-scale garden irrigation
- Washing
- Treating water
- Cooling towers
- Moving clean water in general
SPECIFICATION PUMP :
- Liquid Handled
- Type of liquid : Clean water
- Temperature [°C] : minimum -5, maximum +60, maximum +60(E), maximum+110 (H-HS-HW-HSW
- Maximum working pressure [Mpa] : 0.8
- Construction :
- Impeller : Closed centrifugal type (Twin)
- Shaft seal type : Mechanical Seal
- Bearing : Sealed ball bearing
- Pipe Connection :
- Suction : from G 1″1/4 to G 1″1/2 (2 CDX200)
- Discharge : G 1″
- Material :
- Casing : EN 1.4301 (AISI 304)
- Impeller : EN 1.4301 (AISI 304)
- Casing Cover : EN 1.4301 (AISI 304)
- Shaft seal : Ceramic/Carbon/NBR
- Shaft : EN 1.4301 (AISI 304)
- Bracket : Aluminium (up to 1.5 kW included), Cast Iron (2.2 kW and above)
SPECIFICATION OF MOTOR :
- Type
- Electric – TEFC
- Single phase and three phase
- No. of Poles : 2
- Insulation Class : F
- Power Rating :
- Single Phase : kW (0.75 ÷ 2.2), HP (1 ÷ 2)
- Three Phase : kW (0.75÷ 3.7), HP (1 ÷ 5)
- Frequency : 50 Hz
- Voltage :
- Single Phase : 230 V ± 10%
- Three Phase : 230 V/400 ± 10%
- Casing Material : Aluminium
