High Voltage SANWA Type MG5000

This instrument is a high voltage insulation resistance tester for use in measurement of insulation resistance of a power line and power equipment within the range 0f 600V under CAT.IV.

• Test voltage DC5000V/2500V/1000V/500V/250V
• Insulation Resistance up to 1T Ω
• Short circuit current up to 4mA
• Dielectric Absorption Ratio ( DAR )
• Polarisation Index ( PI )
• Auto discharge function
• Data Hold ( AUTO )
• Auto power save :
  Power save about 10 minutes after the last operation.

Display : Numeral display 1200

Sampling rate : 3 times/sec

Safety : IEC61010 CAT.IV 600V

Test Voltage ( DC )	250V	500V	1000V	2500V
Range	0.0-104.9MΩ	0.0-99.9MΩ	0.0-99.9MΩ	0.0-99.9MΩ	0.0-99.9MΩ	80-1000GΩ	1001-1119GΩ
		80-1049MΩ	80-999MΩ	80-999MΩ	80-999MΩ
			0.80-2.09GΩ	0.80-9.99GΩ	0.80-9.99GΩ
					8.0-99.9GΩ
Accuracy	±5%+3	±5%+3	±5%+3	±5%+3	±5%+3	±20%
Open Circuit Voltage	DC250V	DC500V	DC1000V	DC2500V	DC5000V
	0%-+20%	0%-+20%	0%-+20%	0%-+20%	0%-+20%
Rated test current	3mA±0.5mA
Short Circuit current	3mA±0.5mA
Voltage measurement	AC : 30 – 1000V ( 50/60Hz ), DC : ±30 -± 1000V, Accuracy : ± ( 2% +3dgt )
LCD		Bar graph : 36 points
		DAR/PI value : 9.99
		Timer : 99:59 ( min : sec )
Overload indication		V Function : ” OL ” displayed with buzzer beep
		Insulation function : “ol ” displayed
Max. power consumption		Approx. 18 VA ( Measurement at 5000 V/approx. 1.8 MΩ )
Battery Monitor		4-step indication
IP Rate		IP54
Battery		LR14 X 8
Size / Mass		H188 X W225 X D97mm / 1750g ( Batteries included )
Standard accessories included		Test lead ( TL-5K )
		LINE lead ( TL-5K-R : Red, 3m ), EARTH lead ( TL-5K-B : Black, 3m ), GUARD lead ( TL-5K-G : Green, 3m ), Alligator clip ( TL-5K-A), Test probe ( TL-5K-P ), Hook probe ( TL-5K-H ) Carrying case ( C-MG5K ), Instruction manual, Battery ( LR14 x 8 )