Specification product:
Single Phase ( CPm 132A ), Three Phase ( CP 132A)
Power:
KW: 0.60
HP: 0.85
Flow Rate (Q) = m3/h : Total manometric head = metres
0: 23
0.6: –
1.2: 22
1.8: 21.5
2.4: 21
3.0: 20
3.6: 19
4.2: 18
4.8: 17
5.4: 16
6.0: 14
6.6: 12
7.2: 9
Flow Rate (Q) = l/min : Total manometric head = metres
0: 23
10: –
20: 22
30: 21.5
40: 21
50: 20
60: 19
70: 18
80: 17
90: 16
100: 14
110: 12
120: 9
Ports
Inlet: 1″
Outlet: 1″
Berat: Single Phase : 8.3 kg
Three Phase: 8.0 kg
PERFORMANCE RANGE
- Flow rate up to 160 l/min (9.6 m³/ h)
- Head up to 56 m
APPLICATION LIMITS
- Manometric suction lift up to 7 m
- Liquid temperature between -10 ° C and +90 °C
- Ambient temperature up to +40 °C
- Max. working pressure 10 bar
– 6 bar for CP 100-130-132-150-158
– 10 bar for CP 170-190-200
- Continuous service S1
CONSTRUCTION AND SAFETY STANDARDS
EN 60335-1 EN 60334-1
IEC 60335-1 IEC 60334-1
CEI 61-150 CEI 2-3
CERTIFICATIONS
Company with management system certified DNV ISO 9001 : QUALITY
INSTALLATION AND USE
Suitable for use with clean water and with liquids that are not chemically aggressive towards the materials from which the pump is made. Because they are reliable and easy to use these pumps are widely used in domestic and civil applications such as the distribution of water in combination with small and medium sized pressure tanks, for transferring liquids and for the irrigation of gardens and orchards.
The pump should be installed in an enclosed environment or sheltered from inclement weather.
PATENTS – TRADE MARKS – MODELS
- Registered Trade Mark n. 0001516350 CPm158
- Registered EU Design n. 002098434
OPTIONS AVAILABLE ON REQUEST
- Special mechanical seal
- Other voltages or 60 Hz frequency
- IP X5 Class protection for CP 170, CP170M
