Specification product:
Three Phase ( CP 160A)
Power:
KW: 2.2
HP: 3
Flow Rate (Q) = m3/h : Total manometric head = metres
0: 43
3: 42
4.5: 41.5
6: 40.5
7.5: 39.5
9: 38
10.5: 35.5
12: 33
13.2: 30
14.4: 26
Flow Rate (Q) = l/min : Total manometric head = metres
0: 43
50: 42
75: 41.5
100: 40.5
125: 39.5
150: 38
175: 35.5
200: 33
220: 30
240: 26
Ports
Inlet: 1 1/2″
Outlet: 1 ”
Berat: 21.0 kg
PERFORMANCE RANGE
- Flow rate up to 900 l/min (54 m³/ h)
- Head up to 76 m
APPLICATION LIMITS
- Manometric suction lift up to 7 m
- Liquid temperature between -10 ° C and +90 °C
- Ambient temperature between -10 ° C and +40 °C
- Max. working pressure 10 bar
- Continuous service S1
CONSTRUCTION AND SAFETY STANDARDS
EN 60335-1 EN 60334-1
IEC 60335-1 IEC 60334-1
CEI 61-150 CEI 2-3
CERTIFICATIONS
Company with management system certified DNV ISO 9001 : QUALITY
ISO 14001: ENVIRONMENT
INSTALLATION AND USE
Suitable for use with clean water and with liquids that are not chemically aggressive towards the materials from which the pump is made. As a result of their reliability and the fact that they are easy to use, these pumps are widely used in civil, agricultural and industrial applications such as foe supplying water, in air conditioning and cooling systems for irrigation, etc.
The pump should be installed in an enclosed environment or sheltered from inclement weather.
PATENTS – TRADE MARKS – MODELS
- Registered EU Design n. 002098434 for CP 160, CP 210, CP 250-N
- Registered Italian model n. 72753 for CP 220, CP 230
OPTIONS AVAILABLE ON REQUEST
- Special mechanical seal
- EN 10088-3 – 1.4401 (AISI 316) stainless steel pump shaft for CP 220, CP 230, CP 250
- Other voltages or 60 Hz frequency
- IP X5 Class protection for CP 160
