DAB Jet Pump DP82M centrifugal jet pump For Deep Suction.
APPLICATIONS :
DAB Jet Pump DP82M Self priming centrifugal pump for suction up to 27 metres, reached by using the ejector to be inserted in wells from 4” in diameter or larger. Used for water supply in large country homes and small farms.
CONSTRUCTIONAL FEATURES OF THE PUMP
- Pump: Cast-iron pump body and motor support. Impeller and diffuser in technopolymer.
Stainless steel wear ring. Carbon/ceramic mechanical seal. - Ejector: Body in cast iron Venturi tube in technopolymer A and nozzle in brass
The ejector is available in three models (E 20 – E 25 – E 30) depending on the performance required.
CONSTRUCTIONAL FEATURES OF THE MOTOR
Rotor mounted on oversized greased-for-life ball bearings. Incorporated thermo – amperometric protection and permanently inserted capacitor in the single phase version. It is recommended to use remote overload protection for three phase motors, in compliance with current legislation
TECHNICAL DATA
- Operating range: up to 4.3 m3/h.
- Liquid quality requirements: clean, free from solid or abrasive contaminants, non viscous, non-aggressive, uncrystallised and chemically neutral, close to the properties of water.
- Liquid temperature range:
from 0°C to +35°C for domestic use (EN 60335-2-41).
for other use: from 0°C to +40°C - Maximum ambient temperature: +40°C
- Maximum operating pressure: 6 bar (600 kPa).
- Installation: fixed in a horizontal position.
- Special executions on request: alternative voltages and/or frequencies.
- Motor protection rating: IP 44
- Terminal block protection rating: IP 55
- Insulation class: F
- Standard input voltage: single phase 220-240 V / 50 Hz three phase 230-400 V / 50 Hz
SPESIFIKASI :
- Type : DP 82 M polos
- Daya motor (P2) : 0.6 kw
- Daya Hisap Maksimum : 15 meter
- Total Head Maksimum : 40 meter
- Kapasitas maksimum : 30 liter/ min
- Pipa inlet dan Outlet : 1 1/4 inch dan 1 inch
