Flow Meter TOKICO 3 Inch Adjuster are positive displacement type flow meter which are used in a wide variety of applications including measuring of boiler fuel oil and diesel oil, as well as for transactions for kerosene, light oil and heavy oil.
FRO Type
Flow Meter TOKICO 3 Inch Adjuster is widely used for transaction and in other applications is which a Roots type flowmeter is most suitable.
The Roots rotor rotates without physical contact, resulting in extremely low pressure loss. In addition, its accuracy remain virtually unchanged over a long period of time.
Features :
- Wide flow range and high accuracy
The accuracy of these flowmeters is within ±0.5% over a wide range of flow rates (max range of 1 : 150 for heavy oil)
- Small pressure loss
Because the pressure loss of these meters is low, it is possible to perform accurate measuring at the suction side of a pump as well as accurate measurement of high viscosity fluids.
- Compact Design
A positive displacement type flowmeter can be used at relatively high rotating speeds, making for compact design. In addition, the counter unit of these meters is compact yet easy-to-read, and construction is simple.
- Excellent durability
The simple construction of these meters makes for longterm durability with virtually no degradation of accuracy
- An electrical transmitter Unit attachable
A microswitch or a reed switch type transmitter unit having simple construction and high reliability is available.
Specification Product Flowmeter with Accuracy Adjuster
Applicable Fluid : Petroleum, Petrochemical, etc
With accuracy adjuster : ±0.2%
Flow rate range : 0.004~160m3/h
Fluid Temperature : -5~150°C (50°C is Max. In case of roots material AC7A 150°C is ax. In case of FC200
Max. working pressure : Max, 2.5 MPa (25kgf/cm²)
Fluid Viscosity : Max. 150,000mPa s (150,000cP)
Connection Size : 25mm (1B) ~ 100mm (4B)
Flange rating
FC 2 5 0 : JIS 10K FF
FCD400 : JIS 10K FF
SC PH 2 : (JIS 10K, 20K RF ANSI JP11500, 300 RF)
Material
Main Body :
FC 2 5 0 : (capacity 35-52 type)
FCD400 : (capacity 35-41 type)
SC PH 2 : (capacity 35-52 type)
Rotor : FC200, AC7A or ADC
Rotor Shaft : SUS416 hard chrome plating
Bearing : C5191, FC, Ball bearing
Driving Gear : SUS 420J2
Piping Installation : Horizontal or vertical piping
