![](https://ptsriayumultikreasi.com/wp-content/uploads/2019/07/GRUNDFOS-PUMP-CRE-95.jpg)
GRUNDFOS PUMP CRE 95 Vertical In-line Multistage centrifugal Pump with inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. The Grundfos cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement
![GRUNDFOS PUMP CRE 95](https://ptsriayumultikreasi.com/wp-content/uploads/2019/07/GRUNDFOS-PUMP-CRE-95.jpg)
APPLICATION :
GRUNDFOS PUMP CRE 95 Vertical multistage pump can be used for Irrigation, Industrial cooling, Desalination, Industrial heating, Machining, Process liquids transfer, Industrial process water treatment, Industrial cleaning process, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Solar water solutions, Solar Controls & Digital Water Management, Solar Water Treatment Fertigation and Dosing, Surface water intake, Community water supply, Community solar solutions, Municipal solar solutions, Water distribution
TECHNICAL DATA :
- Liquid:
- Pumped liquid: Water
- Liquid temperature range: -20 .. 120 °C
- Selected liquid temperature: 20 °C
- Density: 998.2 kg/m³
- Technical:
- Pump speed on which pump data are based: 3558 rpm
- Rated flow: 114 m³/h
- Rated head: 47.8 m
- Pump orientation: Vertical
- Shaft seal arrangement: Single
- Installation:
- Maximum ambient temperature: 40 °C
- Maximum operating pressure: 16 bar
- Max pressure at stated temp: 16 bar / 120 °C
- Type of connection: DIN
- Size of inlet connection: DN 100
- Size of outlet connection: DN 100
- Pressure rating for connection: PN 16
- Electrical data:
- Motor standard: IEC
- Motor type: 160LB
- Rated power – P2: 18.5 kW
- Power (P2) required by pump: 18.5 kW
- Over/undersize motor: Standard motor size
- Mains frequency: 50 Hz
- Rated voltage: 3 x 380-480 V
- Rated current: 37.0-31.0 A
- Cos phi – power factor: 0.91-0.88
- Rated speed: 480-3540 rpm
- IE Efficiency class: IE3