HARGA SOCLA TYPE 308 used for Viscous, loaded or thick liquids.
Installation Of Socla Type 308 :
Before putting valve into operation, check that :
- The working conditions are compatible with the details given on the identification plate, the instruction notice and the manufacturer’s detail.
- The valve works effectively when tried ( carry out a few opening and closing operations of the closing system )
- The valve is free pollution inside.
On a new installation or after maintenance, the circuit must be rinsed with the valve completely open in order to remove solid matter which may damage the internal parts of the valve.
Detail Product :
- PRESSURE PFA/PS in bar θ 80°
- CASING : 318 : GJS ductile iron epoxy coated308 : GJS ductile iron epoxy coated
- STRAINER : galvanized steel
- Seal : NBR
- BALL : Aluminium, NBR coated (DN50 to 100) Cast iron, NBR coated ( DN >)
- Flange : PN10
| DN | PFA | PS | Cat | Réf. | UV | ||||
| “ | mm | water | L1 | L2 | G1 | G2 | |||
| 10 | 250 | 10 | 10 | 10 | x | x | 1 | 149F 019180 | 1 |
| 12 | 300 | 10 | 10 | 10 | x | x | 1 | 149F 018860 | 1 |
| 14 | 350 | 10 | 10 | 10 | x | x | 1 | 149B 3029 | 1 |
