Metering Pump Tacmina PZD30R can be used to Transfer of high viscosity liquids may not reach the prescribed maximum discharge volume. This pump also can be used at a variety of locations and for a variety of purposes.
Function Metering Pump Tacmina PZD30R :
- Enter injection amounts directly and select from patterns of injection amount settings
– Set by stroke speed
Setting range : 1 to 3000 strokes/ min (can be set to 1 stroke/ min)
– Set by discharge amount
Setting range : From 0.1 (maximum discharge amount for selected model) mL/ min (can be set to 0.1 mL/min)
– Set by percent
Setting range : 1 to 100% (for a maximum stroke count (300 strokes/ min) of 100% can be set per 1%) - Free Power Supply
100 to 240 VAC (+/-10%) operations means you do not need to worry about voltage fluctuations at the site. This pump can be used at a variety of locations and for a variety of purposes. - Can be used with high viscosity liquids
Also use for polymer coagulant injections - An array of wetted part materials to handle a wide variety of chemicals and uses
– VTCE/ VTCF (Polyvinyl chloride / PVC)
– STCT (Stainless Steel SS304)
– FTCT (PVDF)
– VTCF (PVC) - Easy-to-Read display panel and simple operation keys
- Head swivels in three directions to fit the mounting location
- Separated head and controller convenient for device integration
- Water resistant, dustproof construction
Functions Common To All Models :
Simple correction to actual discharge amount
Simple correction function to automatically discharge 300 strokes of chemicals. Just enter the discharge amount into this device to use the actual flow amount for an easy and accurate correction
Specification Tacmina PZD30R :
- Model : 30 R VTCE
- Maximum discharge volume : 30 mL/ min 1.8 l/h
- Maximum discharge pressure : 0.7 Mpa
- Stroke speed : 1to 3000 strokes/ min (dial setting)
- Stroke length : Fixed at 1.0 mm
- Connection (hose/ tube) :
Discharge/ suction side : 4 x 9 (PVC braided hose), 6 x 8 (PE), 1/4 x 3/8 (PE)
Relief valve/ air release : 4 x 6 (soft PVC hose) - Maximum allowable viscosity : 50 mPa’s
- Allowable temperature : Ambient temperature 0 to 40 deg. C/ Transferring liquid : 0 to 40 deg. C (no freezing allowed)
- Environmental protection : IEC standard : IP65 or equivalent (water and dust proof)
- Operation mode (manual) : Digital settings : 3 patterns [stroke speed (1 to 300 strokes/ min, in 1 stroke / min increments), discharge volume (in 0.1 mL/ min increments), percentage (1 to 100%, in 1% increments)]
- Power supply :
Rated voltage : AC 100 to 240 V ( +/-10%)
No. of phases/ frequency : 1 phase/ 50 or 60 Hz
Maximum current : 2.2 A
Power consumption : Maximum 220 VA/ AVe : 15 W - Weight : 1.7 kg
