APPLICATION :
- Moving Clean water for civil, agricultural.
- Industrial Use pressure boosting units,
- Heating and air conditioning plants.
- Farming Irrigation
- Sport Centers
- Washing plants
SPECIFICATION :
| PUMP | |||
| Liquid Handled | Type Of Liquid | Clean Water | |
| Temperature [0C] | min.-5 | ||
| Max. + 120 (E) | |||
| Maximum working pressure (Mpa) | 1 | ||
| Flange | UNI 2236 | ||
| Counter Flange ( On request ) | UNI 2247 | ||
| Impeller | Closed centrifugal type | ||
| Construction Shaft Seal Type | Mechanical seal | ||
| Bearing | Sealed ball bearing | ||
| Pipe Connection | Suction | Flange to DIN 2532 ( 50 mm – 65 mm – 80mm ) | |
| Discharge | Flange to DIN 2532 ( 32 mm – 40 mm – 50 mm – 65 mm ) | ||
| Material | Shaft seal shaft | Ceramic /Carbon/NBR ( For MD ) | |
| Ceramic/Carbon/FPM ( For MDH ) | |||
| AISI 304 ( Part in contact with liquid ) | |||
| Bracket | Cast Iron | ||
| Applicable standard of test | ISO 9906 – Annex A | ||
| MOTOR | |||
| Type | Electric -TEFC | ||
| Singe Phase | Three Phase | ||
| Efficiency Level ( Reg. 640/2009 ) | IE2 from 1.1 KW up to 22 KW | ||
| No of Poles | 2 | ||
| Rotation Speed [min-1] | ≈ | ||
| Insulation Class | F | ||
| Protection degree (CEI EN 60034-5 ) | IP 55 | ||
| Power Rating [Kw] | 1.1 ÷ 2.2 | 1.1 ÷ 2.2 | |
| Frequency [Hz] | 50 | ||
| Voltage [V] | 230 ± 10% | 230/400 ± 10% ( up to 4 kW ) | |
| 400/690 ± 10% ( 5.5 Kw and above ) | |||
| Capacitor | Built in | ||
| Over load protection | Built in | Provided by the user | |
| Casing material | Aluminium | ||
| Base material /motor Support | Aluminium/Steel | ||
