Pompa CNP TD Series are single stage in line centrifugal pumps, equipped with standard motor and mechanical seal. Comparing with other pumps in similar structure, these pumps are less accessible to the impurity in the liquid.
The pump is designed to be pulled out from the top when disassemble. It can be repaired without affecting the pipelines.
The mechanical seal for TD200 and above is cartridge mechanical seal. Motor needn’t to be disassembled when replace mechanical seal.
Application:
- Cooling water
- Water supply/ distribution
- Drainage
- Irrigation
- General industrial services
- Boosting
Performance range:
- Capacity: Q up to 750m3/h
- Head: H up to 108m
- Temperature: T up to 1100C
- Speed: n 2900/1450rpm or 3500/ 1750rpm
- Power: P up to 132 kw
Standard material:
- Casing: Cast iron
- Stainless steel
- Shaft: Stainless steel
- Impeller: Stainless steel
Description:
- Single stage in-line type
- Driven by a TEFC standard motor
- Top pull out design for fast and easy maintenance.
| Flow Rated |
| 0.4 ~ 240 m³/h |
| Total Head |
| Max. 90 m |
| Liquid Temperature |
| -15°C ~ +110°C |
| Volt |
| 220/380V |
| Material |
| Cast Iron |
| Type | Rated Flow | Total Head |
| [m³/h] | [m] | |
| TD 32 | 12.5 | 50 |
| TD 40 | 25 | 48 |
| TD 50 | 50 | 81 |
| TD 65 | 70 | 81 |
| TD 80 | 100 | 65 |
| TD 100 | 130 | 52 |
| TD 125 | 180 | 50 |
| TD 150 | 200 | 50 |
