Pump DAB K30 100M Single-impeller centrifugal pump suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
TECHNICAL DATA
- Operating range: from 1,8 to 96 m3 /h, with head up to 62 metres
- Pumped liquid: clean, free of solids and abrasives, non-viscous, nonaggressive, non-crystallised and chemically neutral, with properties similar to water
- Liquid temperature range:
From -10 °C to +50 °C
Rest of the range: from -15 °C to +110 °C - Maximum ambient temperature: +40°C
- Maximum operating pressure: 6 bar (600 kPa)
- Protection class: IP 44 (IP 55 for 2,2 – 3 – 4 – 5,5 – 7,5 – 9,2 – 11 kW motors)
- Protection class at the terminal board: IP 55
- Insulation class: F
- Standard voltage:
single-phase 220-240 V / 50 Hz
three-phase 230-400 V / 50 Hz up to 4 kW included – 400 V ∆ 50 Hz from 5,5 kW - Installation: horizontal or vertical position, provided that the motor is always above the pump.
- Special executions on requests: alternative voltages and frequencies
CONSTRUCTION FEATURES OF THE PUMP
- Pump body and motor support in cast iron.
- Technopolymer or cast iron impeller, as per the TECHNICAL DATA table.
- Carbon/ceramic mechanical seal
CONSTRUCTION FEATURES OF THE MOTOR
- Closed asynchronous type, external ventilation cooling.
- Rotor running on ball bearings, oversized to ensure low noise and durability.
- Standard built-in thermo – amperometric protection. Capacitor permanently fitted on single phase versions.
- For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
- Construction according to CEI 2-3.
- IE2 motors as standard, from 0,75 kW to 5,5 kW – IE3 ≥ 7,5 kW
SPECIFICATION Pump DAB K30 100M
- Type : K30/100 M
- Power : 1.1 kw
- Max. suction : 6 meter
- Total head : 29 m
- Capacity : 180 l/min
- Pipa inlet and outlet : 1 1/2 inch & 1inch
