Pump STANDART SKM EVK use for handled liquid clean or normal contaminated low or medium viscosity liquids without solid and fibrous particles.
Pump STANDART SKM EVK has Design Features :
- Vertical ring section, multistage, centrifugal pumps with closed impellers and diffusers.
- Up to 4 m. column length
- Suction nozzle flanges conform to EN 1092-2/ PN 16 and discharge nozzle flange conform to EN 1092-2/ PN 40 ( PN 63 ) ( For steel or stainless steel casing pumps, flanges conform to related pressure class ratings defined in EN 1092-1 )
- All impellers are balanced dynamically or statically according to ISO 1940 class 6.3 )
- Axial thrust is balanced by impeller balancing holes system.
- Direction of rotation is counter clockwise viewed from driver.
Descriptions
- Vertical ring section, multistage, centrifugal pumps with closed impellers and diffusers.
- Bearings of SKM-EVK type pumps are grease lubricated. Bottom and internal sleeve bearings are lubricated by the pumping liquid.
Specifications
- Discharge Flange : DN 32…… DN 150 mm
- Capacity : Up to 400 m3/h
- Head : Up to 220 m
- Speed : Up to 1450 rpm
- Operating Temperature : Up to + 950C
- Casing Pressure ( Pmax ) : 25 bar
Material
- Cast iron, ductile cast iron, stainless steel, duplex or bronze.
Shaft Sealing
- Soft packing seal or mechanical seal.
Rotation
- Direction of rotation is counter clockwise viewed from drive end.
Certification
- CE, ATEX
