Sewage Hot Flowmeter SHM 3 Inch


Sewage Hot Flowmeter SHM 3 Inch DN 80 Analog/ Mechanical Flow Meter for Water & Waste water is an epoxy coated cast iron, it has great flow rate measure and resistant from many light chemical and corrosion.  It can be used for remote reading transmission system as equipped with built-in  sensor (optional) and with data logger, it can record for last six months logs.

Application

Sewage Hot Flowmeter SHM 3 Inch can be used for :

  • Sewage Treatment Plant (STP) ie. Hospital, Hotel, Industrial, Mall, Residential, Palm Oil, etc.
  • Raw water, sludge water and many others
  • Inlet and Outlet Water Treatment
  • Best suited for pump system and high flow rate

Features

  1. Easy installation and maintenance
  2. Dry dial, Magnetic drive
  3. High Bypass and very low head loss
  4. Glass vacuum sealed register, free from condensation and remain clear for long term
  5. Working temperature 0.1-50°C for cold water and 0.1-90°C for hot water
  6. Max. Pressure : 16 Bar. Max. Error : +/_2%
  7. Protection Grade : IP 68
  8. ISO 9001 & ISO 4064
  9. Warranty 2 years (Full service and spare parts)

Technical Specifications

  • Size (DN) : 80, 3 Inch, (80 mm)
  • Max. Flow Q. Max : 80 m³/hour
  • Continues Flow QN : 40 m³/hour
  • Transitional Flow QT : 8 m³/hour
  • Min Flow Q. Min : 1.2 m³/hour
  • Length (L) : 225 mm
  • High (H) : 281 mm
  • Connection Flange : Outside Diameter (D1) 200, Bolt inner Diameter (D2) 160
  • Weights : 16 Kg
Sewage Hot Flowmeter SHM 3 Inch

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories

LOKASI

Copy Protected by Chetan's WP-Copyprotect.