Sewage Pump TSURUMI PU Series is a vortex pump designed for handling raw sewage, wastewater, industrial and commercial sump pump applications. The solid handling design provides practically unchokable operation in sewage pumping. Since the pump is made of special resin and stainless steel, it is corrosion-resistant and lightweight.
- Draining sewage from factory, residence, hotel, restaurant, etc.
- Pumping rainwater and springwater at a place where foreign objects are likely to run into the water.
- Transferring wastewater between the tanks at small-scale treatment facility.
Technical Specifications :
- Watertight Cable Entrance with Anti-wicking block.
- Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
- Built in motor protection
- Continuous duty air filled copper wound highly efficient motor.
- Corrosion Resistant Stainless Steel Motor Casing
- Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.
- Ball type air Relief valve
- Solids handling semi-vortex impeller
- 32ft. power cord
- Available in Automatic Operation (PUA) / Auto Alternating (PUW)
Major Components & Specifications
| Discharge Bore mm | 40 | 50 | 80 | ||
| Pumping Fluid | Type of Fluid | Sewage, Wastewater, and | |||
| water carrying solid matters | |||||
| Fluid Temperature | 0 to 400C | ||||
| Pump | Structure | Impeller | Vortex | ||
| Shaft Seal | Double Mechanical Seal ( with Oil Litter ) | ||||
| Bearing | Double-shielded Ball Bearing | ||||
| Materials | Casing | Glass-fiber Reinforced Resin | |||
| Shaft seal | Glass-fiber Reinforced Resin | ||||
| Silicon Carbide | |||||
| Motor | Type Pole | Dry-type Submersible | |||
| Induction motor, 2-pole | |||||
| Insulation | Class E | ||||
| Phase | Single-phase ( suffix “S” ) | ||||
| Three-phase | |||||
| Starting Method | Capacitor Run ( Single-phase only ) | ||||
| Direct on line | |||||
| Protection Device ( Built-in ) | Circle Thermal Protector | ||||
| Miniature Thermal Protector | |||||
| ( 40PU2.15S, 40PU2.25S & 50PU2.4S only ) | |||||
| Lubricant | Liquid Paraffin ( ISO VG32 ) | ||||
| Materials | Frame | 304 Stainless Steel | |||
| Shaft | 420 Stainless Steel ( 0.15kW only ) | ||||
| 304 Stainless Steel | |||||
| Cable | PVC | ||||
| Discharge Connection | Screwed Flange |
