SHM DN20 Hot Water Meter Analog/ Mechanical Brass Multi Jet Vane Wheel Dry Dial Cold 50°C and Hot 90°C Clean Water Meter Size DN 15-DN 50 (1/2″-2″)
DESCRIPTION :
SHM Multi Jet Brass Flow Meters : Analog/ Mechanical Flow Meter for Clean Water are made from brass material and external measuring component made from modern thermoplastic material.
APPLICATION :
SHM Multi Jet Brass Flow Meters can be used for Irrigation, cooling systems, filtration systems, water monitoring, residentials, etc.
FEATURES :
- Multi Jet, Dry Dial, Turbine Type
- Magnetic Drive reliable characteristic, long working life. Pulse output Optional.
- Vacuum sealed register ensures the dial keep free from fog and frost, keep the reading clear in a long term service.
- Working temperature 0.1-50°C for Cold Water and 0.1-90°C for Hot water
- Water pressure </=1.0 Mpa 0r 1.6 Mpa
- Protection Grade : IP 68
- Maximum Pemissible Error :
- In the lower zone from qmin inclusive up to but excluding qt is +/-5%
- In the upper zone from qt inclusive up to and qs is +/-2%. For hot water meter +/-3%
- ISO 9001 and ISO 4064
- Warranty 2 years (Full service and spare parts)
TECHNICAL SPECIFICATION :
Size (DN) : 20, 3/4 Inch, (20 mm)
Over Load Flow Qs : 5 m³/hour
Permanent Flow Qp : 2.5 m³/hour
Transitional Flow QT : 200 l/hour
Min Flow Qmin : 50 l/hour
Length (L) : 190 mm
Width : 98 mm
High (H) : 117 mm
Weights : 1.79 Kg
