Special Features of pump
- Low weight high efficiency
- Suction case, stage casing and discharge chambers are made by stainless steel ( AISI 304 Grade ) from sheet metal so rust free and long service life.
- Bearing bush is made of anti friction rubber to witstand wear resistance.
- Redial flow and mixed flow impellers & bowl made from stainless steel ( AISI 304 Grade )
- Non return valve made in stainless steel ( AISI 304 Grade ). The valve casing is designed for optimum hydraulic properties to minimize the pressure loss acrross the valve and, thus, constributes to the high efficiency of the pump.
- All bearings are waterlubricated and have a square shape, enabling sand particles, if any, to leave the pump together with the pump liquid.
- The inlet strainer prevents particles over a certain size from entering the pump.
- Stop Ring which is designed as thrust bearings limits axial movements of pump shaft.
- Pump motor coupling is according to NEMA standard.
- Suitable to 4″, 6″, 8″ Submersible Motor.
STANDARD SPECIFICATION :
- Operating Limit in 50 hz
- Capacity – maximum 78 m3/h
- Head – maximum 440 Mtr
- Liquid temperature – 00 C bis +600 C
- Send content – max 50g/m3
- Operating limit in 60 hz
- Capacity – maximum 118 m3/h
- Head – maximum 460 Mtr
- Liquid temperature – 00 C bis +600 C
- Send content – max. 60g/m3
- Starting per hour – max 15 to 20
- Normal oulet size – 2″, 2.5″, 3″, & 4″
- Immersion – 1 Mtr minimum
- Pumped liquid – Clean free from solid chemically natural and close to the characteristics of water
Applications :
- Irrigation and Drip Irrigation’
- Sprinkler, Grdening and Nursery
- Domestic water supply
- Bungalows.
- Housing complexes
- Ornamental fountains.
- Small farms.
- Industrial water supply schemes.
- Fire fighting systems
