STANDART Pump SKMV H

STANDART Pump SKMV H handled liquids clean or slightly contaminated low viscosity liquids without solid and fibrous particles.

Descriptions

• Vertical ring section, multistage, centrifugal pumps with closed impellers and diffusers.
• 8 models from DN 32 up to DN 150 discharge flange diameter.
• SKMV-H pumps are short coupled with electric motors of IEC frame sizes with high efficiency class.
• Pump and motor shafts are connected to each other with flexible coupling.
• Axial thrust is balanced by impeller balancing holes system
• Direction of rotation is always counter clockwise viewed from drive end.
• Bearings of SKMV H type pumps are grease lubricated by the pumping liquid.

Specifications

• Discharge Flange : DN 32……DN 150 mm
• Capacity : Up to 400 m³/h
• Head : Up to 450 m
• Speed : Up to 2900 rpm
• Operating temperature : -10⁰C up to +140⁰C
• Casing Pressure ( Pmax ) : 25 bar ( 63 bar )

 

Material

• Cast iron, ductile cast iron, stainless steel, duplex or bronze.

Shaft Sealing

• Soft packing seal or mechanical seal.

Rotation

• Direction of rotation is counter clockwise viewed from drive end.

Certification

• EN ISO 9905, CE, GOST-R, ATEX