Specification product:
Single Phase ( Top 3-GM)
Power:
KW: 0.55
HP: 0.75
Flow Rate (Q) = m3/h : Total manometric head = metres
0: 10.5
1.2: 10
2.4: 9
3.6: 8.8
4.8: 8
6.0: 7.5
7.2: 6.5
8.4: 6
9.6: 5.5
10.8: 4.8
12: 4
13.2: 3.5
14.4: 2.5
15.6: 2
Flow Rate (Q) = l/min : Total manometric head = metres
0: 10.5
20: 10
40: 9
60: 8.8
80: 8
100: 7.5
120: 6.5
140: 6
160: 5.5
180: 4.8
200: 4
220: 3.5
240: 2.5
260: 2
Ports
Outlet: 1 1/4″
Berat: 6.7 kg
PERFORMANCE RANGE
- Flow rate up to 360 l/min (21.6 m³/ h)
- Head up to 15.5 m
APPLICATION LIMITS
- Immersion depth:
– up to 3 m for TOP 1-2-3
– Up to 5 m for TOP 4-5
( wirh a sufficiently long power cable )
- Maximum liquid temperature +40 °C
( Maximum liquid temperature +90 °C)
for a maximum of 3 minutes intermittent service )
- Passage of suspended solids up to Ø 10 mm
- Suction level:
– 14 mm above ground level for TOP 1-2-3
– 30 mm above ground level for TOP 4-5
- Continuous service S1
CONSTRUCTION AND SAFETY STANDARDS
The pumps are complete with:
– 5 m long power cable for TOP 1-2-3
– 10 m long power cable for TOP 4-5
– Float switch
EN 60335-1 EN 60334-1
IEC 60335-1 IEC 60334-1
CEI 61-150 CEI 2-3
CERTIFICATIONS
Company with management system certified DNV ISO 9001 : QUALITY
ISO 14001 : ENVIRONMENT
INSTALLATION AND USE
The TOP series is suitable for use with clean water that does not contain abrasive particles.
Because of the design solutions that have been adopted, such as the complete cooling of the motor and the shaft with double seal, these pumps are easy to use and reliable.
They are suitable for use in applications such as draining small flooded areas ( rooms, cellars, garages ) in the event of an emergency, for the disposal of waste water in the home ( from diswashers, washing machines) and for emptying drainage traps.
PATENTS-TRADE-MARKS-MODELS
- Registered EU Design n. 342159-0011
OPTIONS AVAILABLE ON REQUEST
- “TOP GM” pumps with vertical float switch ( suitable for particularly small wells )
- “TOP 2-3 LA” pumps intended for use with aggressive liquids
- Special mechanical seal
- TOP 1-2-3 pumps with 10 m long power cable
-> N.B. Standard EN 60335-2-41 states that the power cable must be 10 m long for outdoor applications - pumps without float switch
- other voltages or 6o Hz frequency
