Wastewater Pump GRUNDFOS APG50 designed for pumping wastewater, sludge-containing water, groundwater, and sewage. Equipped with a cutter system which cuts all destructible solids into small pieces.
PRODUCT DESCRIPTION :
- Submersible grinder pump
- Vertical single-stage cast iron submersible pump with integrated submersible 3-phase motor.
- The pump is fitted with carrying handle and is supplied with a 10 m mains cable.
- Equipped with a hardened steel cutter system suitable for pumping wastewater and sewage in pressurised systems.
- Wastewater Pump GRUNDFOS APG50 has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
- The motor is insulation class F and has long-life deep-groove greased-for-life ball bearings.
- Has DN 50 discharge port and is ready for installation on an auto-coupling system or can be supplied with ring stand for free-standing installation or portable use.
TECHNICAL DATA :
- Liquid:
Liquid temperature range: 0 .. 40 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³ - Technical:
Type of impeller: CUTTER SYSTEM
Curve tolerance: ISO9906:2012 3B - Materials:
Pump housing: Cast iron
Impeller: Cast iron - Installation:
Pump outlet: DN 50
Maximum installation depth: 10 m - Electrical data:
Power input – P1: 11 kW
Rated power – P2: 9.2 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 400 V
Rated current: 19.1 A
Cos phi – power factor: 0.81
Rated speed: 2900 rpm
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of cable: 10 m
Type of cable plug: NONE
