Water Meter AMICO 65MM 2.5 Inch are always used when high flow rates with a relative constant flow rate profile are to be measured. Through its robust construction they not only are capable of covering a large measuring range, but Water Meter Amico 65MM 2.5 Inch the measuring accuracy is also long-term stable.
They hydrodynamic optimize turbine is reliability operated already at small flow rates and “upwards” is has enough power reserve to reliably measure flow rate peaks. Especially strong bearings with low friction guarantee a long life of the meter.
Reed sensors, optical and inductive – NAMUR sensors can always be retrofitted without the damaging calibration seal. Then the meter can be integrated with data communication or automation or automatic and control systems in a simple and flexible way.
Performance Characteristics in Overview :
- Low starting flow, high overload security
- Wide measuring range
- Removable measuring insert
- Low head loss
- Hidraulic bearing relieve for lomg-term measuring stability
- Retrofittable with active nd passive pulsers
- Metal Protective cover serially, plastics optional
- Eacuated counter protected from condensation
- Dry dial counter with large number rollers simplities the readability
- For cold water up to 30°C , with security up to 50°C
- For horizontal, vertical installation positions
- High Pressure
Technical Data :
- Nominal Diameter : DN 65
- Nominal Flow (Qn) : 25 m³/hour
- Overal Length (L) : 220 mm
- Metrological class : B
- Maximum Flow (short-term) Qmax : 120m³/hour
- Maximum Flow (constant) : 60m³/hour
- Transitional Flow (Qt) : 2 m³/hour
- Minimum Flow (Qmin) : 0.45m³/hour
- Flow Rate with 0.1 bar head lose : 50 m³/hour
- Head lost at Qmax : 0.1 bar
- Display range : Min 2 l/ Max 9.999.999m³
- Maximum temperature : 50°C
- Operating pressure, max : 16 bar
- Height (H) : 208 mm
- Flange diameter (D) : 185 mm
