Water Meter Pulsafeeder 1 Inch use for :
- Plastic Body NSF 61 certified – Residential Water Conditioning and Portable Water
- Brass Lead-Free NSF 61 certified – Municipal, Industrial, Heat Transfer Cooling Tower and Boiler.
Water Meter Pulsafeeder 1 Inch ( Brass ) provide value by offering efficient, accurate operation for potable and non-potable water applications. The meters are offered in three body types: Plastic ( potable water ) Low-lead brass ( potable water ) and leaded brass ( non-potable water ). The water meters are available in both totalizing & contacting head type providing a dry contact output proportional to flow and can interface directly with both Pulsafeeder pumps and controllers. A totalizing register dial records flow over a wide range with low head loss.
Features Of Water Meter Pulsafeeder 1 Inch ;
- Sensor fastens to lens without removing top
- Calibration plug seal wire for tamper evidence
- Union end couplings for each service
- Factory set pulse rates
- Changing pulse rate requires no specials tools
- Adjustable GPC ( Tools required, see instruction manual for more details )
Specifications :
- Power Input: 24 Vdc or Vac Max
- Average Current Draw: Multi-Jet Meter: 20 mA Max,
- Accessories
- Boiler Controllers
- Cooling Tower Controllers
- Metering Pumps
- Pre-Engineered Systems
Technical Water Meter Pulsafeeder 1 Inch :
| Connection/ Size | 1 Inch NPT ( 25 mm ) |
| Rating | 75-50 GPM |
| Gallons Per Contact ( GPC ) | Totalizer/ Less Red ( Part Number : MTR300-G ) Switch ( Part Number : MTR300-G ) 0.1 GPC ( Part Number : MTR301-G ) 0.25 GPC ( Part Number : MTR302-G ) 1 GPC ( Part Number : MTR304-G ) 10 GPC ( Part Number : MTR307-G ) 100 GPC ( Part Number : MTR310-G ) |
| Power | 6mA at 12 Vdc ( Hall Effect Sensor Only ) |
| Temperature | 1050F ( 40 0C ) max |
| Pressure | 150 PSI operating ( 10.3 Bar ) |
| Accuracy | +/- 1.5 % of reading |
| Materials | Body : Plastic or Eco-brass alloy Internals : Engineered thermoplastic Magnet : Alnico Fittings : Lead-free tail piece |
