Detail LUTRON THERMOMETER TM-2000
Features :
- 3 in 1, Infrared thermometer + Pt 100 ohm thermometer + thermocouple ( Type K, J, R, E, T,) thermometer.
- The best proffesional thermometer in the world
- Microcomputer circuit with high performance
- Wide temperature measuring range
- Build in ◦C & ◦F select button on the front panel
- 0.1 degree resolution for Pt 100ohm and type K/J/T/E
- Data hold function for storing the desired value on display
- Memory function to record the maximum and minimum reading
- Build in REL button, useful for relative measurement
- LCD display with back light
- Sensor select button on the front panel, easy to change different type probe
- Infrared thermometer, non-contact temperature measurement, 0-20◦C to 400◦C *(-4◦F to 752◦F), precise non contact temperature measurement
- Amissivity adjustment for IR thermometer
- Laser guide for IR temperature measurement
- 4 wires PT 100 probe input, cooperate with an 0.00385 alpha coefficient, meet DIN IEC 751, high precision
- Thermocouple probe accept 5 different types : K,J,R,E,T
- RS-232, Dara output easily cooperate with computer
- Optional data acquisition software for data record
- Auto power off saves battery life
- Built-in low battery indicator
- Heavy duty and compact housing case with stand
GENERAL SPECIFICATIONS
- Display : 51×32 mm super large LCD display, 15 mm ( 0.6 inch ) digit size
- Sensor type :
1. Infrared thermometer ( No contact temperature measurement )
2. Platinum Pt 100 ohm ( 0.00385 alpha coeficient, meet DIN IEC 751 )
3. Thermocouple probe
@ Thermocouple type K
@ Thermocouple type J
@ Thermocouple type T
@ Thermocouple type E
@ Thermocouple type R - Functions : ℃ ℉, Data hold, Memory ( Max. Min ), Relative measurement, Emissivity adjustment ( IR thermometer )
- Resolution : 1 degree or 0.1 degree
- Circuit : Exclusive microcomputer circuit, the software build in linearity correction instead the traditional hardware circuit
- Emissivity adjustment : Range : 0.20 to 1.00
Adjustment by pushing button on front panel - Laser quide : Red laser light, less tahn 1 mW, Meet EN60825
- Probe input socket :
Pt 100 ohm probe : DIN 4 pin socket
Thermocouple couple probe : Standard 2 pin thermocouple socket - Sampling time : Approx. 1 second
- Hold function : To freeze the display reading value
- Memory recall : Memorize the maximum, minimum reading with recall
- Offset adjustment : Available for IR thermometer, Pt 100 ohm and thermocouple thermometer adjustment by pushing button on front panel
- Over indications : Show “—“
- Data output : RS232 PC serial interface
- Power supply : Alkaline or heavy duty type, DC 9V battery, 006P, MN1604 ( PP3 ) or equivalent
- Power consumption :
Approx. DC 11 mA ( Laser guide off )
Approx. DC 16 mA ( Laser light on )
* Above consumption value is calculated under the function of IR thermometer and without LCD back light - Operating temp : 0 to 50 ◦C (32 to 122 ◦F )
- Operating humidity : Less than 80% R.H
- Dimension : 200x68x30 mm
