Flexible Joint Tozen 50MM Drat can afford large defletion that you can hardly imagine. It has various functions and are highly reliable.
This double Sphere TWINFLEX rubber joint allows increased compression, elongation and angular movement. The unique double sphere design improves noise and vibration isolation and dampens hydraulic surge and shock. Refer to the product data sheets for more information.
Key Benefits
- Compensate for axial and lateral movement due to thermal changes.
- Isolate noise and vibration from piping system.
- Complete union assembly provided for ease of installation
- No gasket needed for sealing area
Typical Application
TWINFLEX union type joints are used for connecting pipes and equipment where threaded union ends are preferred.
Operating Conditions
| Size Range | 1/2″ to 2″ |
| Max. Pressure | 142 psig |
| Operating Temperature | 14°F to 158°F |
| Vacuum Rating | 25″Hg |
| Burst Pressure | Greater than 780 psig |
Feature
- High Efficiency for vibration and Noise Isolation
The twin sphere makes the spring constant small, decreases the body natural frequency and increases the efficiency of vibration absortion. - Withstandability
It can withstand a bursting pressure of over 780 psi. Rubber body with maximum working pressure of 250 psi and with the combination of excellent formative technique and strong chemical fibre. - Large Displacement Absorption for Eccentricity, Axial Movement and Angular Movement
Since it can absorb large displacement, TWINFLEX screwed type flexible rubber joint is most appropriate for the protection of pipe line system. For example, it can prevent the destruction of connecting pipe due to arthquake and subsidence of ground. - Applicable for both suction and delivery
The joint first for both suction and delivery - Highly Reliable
The packing parts are strengthened with steel reinforcing rings to prevent the rubber body from slipping out of the fitting sides of flanges. - Convenient to install
When limited space is allowed for installation, the free type sockets can be screwed separately to pipe before fitting in the joint.
Applications
- Applicable for piping systems in commercial and industrial buildings and plants.
- Applicable fluids are exclusively water including cold water, warm water, cooled water, sea water, etc.
Materials
- Flange : Ductile Iron
- Nut : Mild Steel
- Bolt : Mild Steel
- Reinforcing cord : Synthetic Fiber
- Inner Rubber : Synthetic Rubber
- Outer Rubber : Synthetic Rubber
- Reinforcing cord : Synthetic Fiber
- Union Edge : Ductile Iron
- Washer : Mild Steel
Dimension
- Nominal Size : 50 mm 2 inch
- Length : 175 mm
- Mass : 5.4 kg
