Residual Pumps HCP GDR400 features a lightweight and slim design. The lightweight and slim design. The lightweight and small pump body makes this pump easy to carry to any corner of construction sites for dewatering. The slim design of the pump body also allows the pump to be installed in drainage pipes or pits of construction sites, narrow wells, confined spaces, or shallow water. The cooling Jacket design provides extra water cooling to the motor, when water flows through. The impeller and the hydraulic components are mode of a special rubber that is durable and capable of handling construction site dewatering.
Feature Of Residual Pumps HCP GDR400 :
- Water cooling motor, rubber suction pads for residual removal down to 1mm (0.39″)
- Portable and Light weight best pump for removing water from flat surfaces.
- Double seals (silicon carbide), epoxy resin cable, IP68, an Auto-cut motor protector, rubberized hydraulic components against any tough applications.
- Standard discharge : Outlet discharge 1″ LOT 1-74 (Optional 2″ LOT 2-74)
Applications :
Residual Pumps HCP GDR400 can be used for :
- Basement/ pool/ pond water removal
- Residential, commercial residue dewatering
Specifications :
- Discharge : 50 mm
- Limit of use :
– Liquid Temp. : 0~40 deg. C (32~104 deg. F)
– Submersion Depth : 10 m - Type :
– Frequency : 50 Hz
– Motor : 2P (30000 RPM), Dry Motor
– Insulation : Class B
– Protection : IP 68
– Protector : Auto-cut
– Bearing : Ball type
– M. seal : Double M. seals
– Cable base : Epoxy resin sealed - Material :
– Upper cover : ADC12
– Motor frame : ADC12
– Shat End : SUS410
– M. seal : CA/ CE & SiC/ SiC
– Casing : Synthetic rubber
– Impeller : Urethane rubber + SPCC
– Cable : VCT or H07RN or SJOW
Performance Specification :
- Model : GDR-400
- Output : 0.5 HP (0.4 kW)
- Discharge : 1 inch (25 mm)
- 1 phase
- Start Method : Capacitor
- Head : 8 m
- Capacity : 0.07 m3/min, 4.2 m3/h
- Solid passage : 1.5 mm
- Weight : 11 kg
