Grundfos Pump MPC F Booster systems with frequency converter control. Pressure booster system supplied as compact assembly according to DIN standard 1988/T5.
The pumps are CR(I) pumps connected to one external Grundfos CUE frequency converter. The speed-controlled operation alternates between the pumps.
- Hydro MPC-F maintains a constant pressure through continuous adjustment of the speed of the pump connected to the CUE frequency converter.
- The system performance is adapted to the demand through cutting in/out the required number of CR(I) pumps and through parallel control of the pumps in operation.
- Pump changeover is automatic and depends on load, time and fault.
APPLICATIONS GRUNDFOS PUMP MPC F :
Grundfos Booster Pump Suitable for :
- Water Treatment Fertigation, Chemigation & Dosing
- Controls & Digital Groundwater Management
- Drip, Micro Spray & Soaker Hose Irrigation
- Frost protection
- Rotor & spray irrigation
- Livestock & Wildlife Watering
- Livestock watering with solar solutions
- Pivot & Lateral Irrigation
- Agriculture solar solutions
- Solar boosting and water supply solutions
- Ground water transfer
- Commercial heating
- Commercial water pressure boosting
- District cooling and heating
- Drinking water treatment
- Irrigation
- Industrial cooling
- Desalination
- Industrial heating, cleaning process, water supply & transfer
- Solar Controls & Digital Water Management
- Solar Water Treatment Fertigation & Dosing
- Community water supply and solar solutions
- Municipal solar solutions
- Water distribution
- Wastewater treatment
PUMP OPERATION
Pump operation is controlled by Control MPC with the following functions:
- Intelligent multipump controller, CU 352.
- Constant-pressure control through continuously variable adjustment of the speed of each individual pump.
- PID controller with adjustable PI parameters (Kp + Ti).
- Constant pressure at setpoint, independent of inlet pressure.
- Soft pressure build-up (To prevent water hammer during start up).
- On/off operation at low flow.
- Automatic cascade control of pumps for optimum efficiency.
- Selection of min. time between start/stop, automatic pump changeover and pump priority.
- Automatic pump test function to prevent idle pumps from seizing up.
- Possibility of standby pump allocation.
- Possibility of backup sensor (redundant primary sensor).
- Secondary sensor (Possible to switch to another sensor/setpoint).
- Multi-sensor (up to 6 sensors to influence the setpoint).
- Manual operation.
- Possibility of external setpoint influence.
- Log function.
- Setpoint ramp.
- Possibility of digital remote-control functions:
- System on/off.
- Max., min. or user-defined duty.
- Up to 6 alternative setpoints.
- Digital inputs and outputs can be configured individually.
- Pump and system monitoring functions:
- Minimum and maximum limits of current value.
- Inlet pressure.
- Motor protection.
- Sensors and cables monitored for malfunction.
- Alarm log with the previous 24 warnings/alarms.
- Display and indication functions:
- Colour screen display.
- Green indicator light for operating indications and red indicator light for fault indications
- Potential-free changeover contacts for operation and fault.
- Grundfos bus communication.
TECHNICAL DATA :
- Flow media: Water
- Allowed liquid temp.: 5 °C .. 60 °C
- System pressure max.: 16 bar
- Flow (Plant): 370.5 m³/h
- Nom. current of plant: 43 A
- Nominal power: 7.5 kW
- Net weight: 896 kg
