Dewatering Pump HCP AS215

Dewatering Pump HCP AS215 use for Dewatering of fluids containing solid sediments, Civil engineering, dewatering of tunneling and ground works, and for use in storm water sewers.


  • Design for civil engineering applications; its easy portability, double outer casing and water cooling motor make it possible to run the pump to low water level.
  • Epoxy Resin Cable with IP68 standard for waterproof structure, automatic rest motor protector and double mechanical seal made of silicon carbide. Equipped with an AC motor protector to further obtain the best insulated status. It is a very durable and abrasion resistant pump.
  • Multi-impeller design with High Chrome Alloy Steel (HiCr) impeller, wear plate and wear rings with a hardness 55-60 Rockwell. It hardest and toughest impeller among the construction pump, againts abrasion, and meets the requirements from low to high head and small to big capacity.
  • AS 1.5-7.5kW equipped with Flange discharge connection. The outer cover is built with high strength stainless steel.


APPLICATIONS Of Dewatering Pump HCP AS215 :

  • Civil engineering, dewatering of tunneling and ground works, and for use in storm water sewers.
  • Dewatering of fluids containing solid sediments.
  • Ease of mobility for use by contractors, installers and service industries.



Model : AS-215

HP (kW) : 1 1/2 ( 1.1 )

Discharge : 2″ ( 50 )

Phase ( Ø ) : 1 dan 3

Start Method

Phase 1 : Capacitor

Phase 3 : Direct

Head : 13.5 m

Capacity :  0.2 m3/min, 12 m3/h

Solid Passage : 7.5 mm

Weight :

1 Phase : 28 kg

3 Phase : 24 kg

Dimension :

A: 210 mm

B: 482 mm

C: 423 mm


1 Phase: 370 mm

3 Phase: 429 mm



Discharge 50 . 80 . 100 . 150
Limits Of Use Liquid Temp. 0-40 0C ( 32-104 0F)
Applications Construction sites . Basins dewatering
Submersion Depth 30m ( 100feet )
Type Frequency 50 Hz
Motor 2P (3000RPM) . Dry Motor
Insulation Class B ( 1.5-3HP ) . Class F (5-10HP)
Protection IP68
Protector Auto-cut
Bearing Ball Type
M.seal Double M.seals
Impeller Semi-open (H) . Enclosed-channel (N/L)
Material Outer Cover SUS304
Upper Cover FC-200
Motor Frame SUS304 (1.5HP) . FC-200 ( 2-10 HP)
Shaft End SUS403 ( 1 1/2-3HP) . SUS304 (5-10HP)
M.seal Upper: Carbon/Ceramic . Lower: Silicon/Silicon
Casing FC-200
Impeller HiCrFC
Wear ring/Plate HiCrFC
Cable VCT or H07RN-F or SJOW/SOW
Optional Pumps can be customized to fit specifications
Dewatering Pump HCP AS215

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *



Copy Protected by Chetan's WP-Copyprotect.