Electronic Digital Nozzle SHM

Application

Automatic Electronic Digital Nozzle SHM can be used for Urea, Adblu, Diesel, Gasoline, Kerosene, etc.

Specification

• Flow Range : 5-60 L/min
• Accuracy : +/- 0.5%
• Inlet : 3/4″ BSP
• Outlet : 3/4″
• Repeatibility : < 0.2 %
• Pressure : 0.6 MPa
• Power Supply : Battery AAA
• Units : L/gal/Quart/QTS/PTS
• Warranty 2 Years ( Full Service & Spare Parts )
• Nozzle will automatically go to sleep after 40 seconds press any key to turn it on.

Data Query Operation

1. Press CAL key once : display shows FLOW RATE.
2. Press CAL key twice : display shows RESET TOTAL L, operate class cumulative volume.
3. Pres CAL key three times : display shows RESET TOTAL P, operate class cumulative amount.
4. Press CAL key for 5 seconds : display shows LC, operate total cumulative volume.
   press RESET, display shows PC, operate total cumulative amount.
5. Press RESET key for 5 seconds : Reset class cumulative data.
6. Press RESET key once : Reset current data.

Setting Operation

Press RESET and CAL key at the same time to enter modification system.

1. Modify unit price : Press CAL key, display shows 1-1, press RESET to modify number. Press CAL key 5 seconds to exit.
2. Modify coefficient : Press CAL key, display shows 1-1, press RESET key once, display shows 1-2. Press CAL key, then press RESET key to modify number. Press CAL key 5 seconds to exit.
   1. Modify unit price : Press CAL key, display shows 1-1, press RESET to modify number. Press CAL key 5 seconds to exit
   2. Modify coefficient : Press CAL key, display shows 1-1, press RESET key once display shows 1-2. Press CAL key, then press RESET key to modify number. Press CAL key 5 seconds to exit.
   3. Modify Measurement : press CAL key, display shows 1-1, press RESET key twice, display shows 1-3. Press CAL key, L = liter, G = gallon. press RESET key to change. Press CAL key 5 seconds to exit.