Hot Water Meter Sensus 4 Inch WP Dynamic user for measure water up to 130°C.
Main Characteristics :
- Patended hydrodynamically balanced rotor
- Patended symmetrical calibration adjustment
- Hemetically sealed register (IP 68)
- Register may be rotated through 360°
- High overload capability
- Removable measuring element
- Up to 3 pulsers ( 1 x OD, 2 x RD) may be fited without breaking the approval seal
Powder coating affords maximum corrosion protection
Application Of Hot Water Meter Sensus 4 Inch WP Dynamic :
- Flow sensor for heat meters for commercial and light industrial use DN 50 bis 150 for customer billing
- For measurement of hot process water up to 130°C
- For high permanent flow rate such us as generaed by pumps, as well as for the measurement of low flow rates in off-peaks periods
- Installation in horizontal and vertical pipe lines.
Performance Data WP Dynamic 130 °C
- Nominal Diameter : DN 100
- (Qmax) Max. Peak Flow once in life time 24 h Qmax or 5 Min. 1,2 x Q max: 140 m³/h
- (Qn) Continuous Flow (±2%) : 70 m³/h
- (Qt) Transitional flow (±2%) : 4.8 m³/h
- (Qmin) Minimum Flow : (±2%) : 2.0 m³/h
- (Qmin) Starting flow : 0.6 m³/h
Performance data table according to DIN EN 1434
- Nominal Diameter : DN 100
- (qs) Overload Flowrate : 120 m³/h
- (qp) Continuous Flow Horizontal : 60 m³/h
- (qih) Minimum Flow Horizontal : 2.4 m³/h
- (qiv) Minimum Flow Vertical : 6 m³/h
- (qp/qi) Ratio Horizontal : 25
- (qp/qi) Ratio Vertical : 10
