POMPA MCKARLEN PC SERIES, especially in the presence of water mixed with gas. For use in supplying water to pressure boosting, irrigation, wash down applications farmhouses and in small scale agriculture. These pumps are very reliable in the toughest of environments.

Liquid quality requirements : Clean, free from solids or abrasive substances, on aggressive

Liquid temperature range : From 00C to +350C for residential use

Installation : Fixed in a horizontal position

Cast iron pump body and motor support treated against corrosion also on the inner surface. Technolymer impeller, diffuser and Venturi tube and brass nozzle. Carbon/ceramic mechanical seal mounted on stainless steel rotor shaft extension.

Asynchronous motor, closed and cooled with external ventilation. Rotor mounted on greased sealed-for-life ball bearings, selected to ensure silent running and a long life. Built in thermal and current overload protection and a capacitor permanently in circuit in the single-phase version.

Manufactured according to standard EN 50335-2-41

  • Motor : IP44 / Class F / 2900 rpm / 50 Hz
  • Standard Voltage : 1 x 220-240 V
  • Ambient Temperature : Up to 400C


Before installing the pumps verify that all pipes ( iron, plastic, or rubber ) are clean inside so to avoid any obstruction to the ejector nozzle. At the foot of the ejector must be installed a foot.

Valve or a check valve. Installed the pumps, fill completely both pipes and pump body with clean water.


Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *



Copy Protected by Chetan's WP-Copyprotect.