The pumps in the PRIOX series are constructed in 100% AISI 304 stainless steel. They operate entirely immersed in the pumped liquid, which serves to cool the motor from the exterior.
Designed with retracted impeller and vortex operation. Automatic version ( aut ) equipped with float switch.
Applications
- All applications for lifting and draining waste water with suspended solid bodies
- Lifting stations with one or more pumps for agricultural and civil complexes.
Application Data
- Type Of Liquid : Waste and sewage water with solid bodies.
- Maximum liquid temperature : 400C
- Maximum immersion below water level : 7 m.
- Minimum drainage level 60 mm ( on manual version ).
- Free transit of solid bodies : 40 mm; 50 mm ( PRIOX 600/13 – PRIOX 800/18 )
Motor
- Dry motor
- Protection rating IP 68
- Insulation class F.
- Single phase power supply with permanently activated capacitor and thermal cutout protection incorporated in the motor winding
- Fully insulated cable connection chamber.
- Self-lubricating ball bearings.
- Rotation speed 2850 rpm.
Materials
- Pump Body : Stainless steel X5 CrNi 1810 ( AISI 304 )
- Stainless steel X5 CrNi 1810 ( AISI 304 )
- Impeller : Cast stainless steel X5 CrNi 1810 ( AISI 304 )
- Delivery port : Threaded
- Cover : Cast stainless steel ( Priox 800/18 )
- Power Cable : 10 m H07 RN-F with plug
- Motor shaft : Stainless steel X5 CrNiS 1809 ( AISI 416 )
- Mechanical gasket : Silicon carbide
- Counterface : Silicon carbide
- Secondary seal : Lip seal in rubber NBR
- V-ring sand guard : Rubber NBR
Specifications
- Motor Output : 3.2 HP, 2.4 kW
- Power Motor : 4 HP, 3 kW
- 3-400 Volt
- DNM : 2″
- Weight : 20.2 kg