Sewage pump HCP F31U use for Drainage of sewage from the building basements, hotel industry, and waste water from factories.
FEATURE
- A precision manufactured motor is achieved by utilizing the highest standard of quality control. All rotors adopt heat treatment methods for drive shaft assembling, and stator winding impregnated with varnish that is heat dried in an industrial oven. The Water Resistance for pump can reach IP68 Grade.
- HCP’s professional assembly line, complimented with a synthesized production test, ensures the highest level of final pump quality.
- Standard accessories include : cable with an epoxy resin sealed water – resistant cable base, AC thermal motor protector dual mechanical seals and lip seal design.
- The F-05A is an extremely practical pump, with an oil filled motor and single seal design ( CA/CE ).
APPLICATION Of Sewage pump HCP F31U :
- Drainage of sewage from the building basements, hotel industry, and waste water from factories.
- Drainage of sewage from industrial process factories.
- Emptying of septic tanks, cesspits and sewage pump stations.
- Pumping surface and drainage water from garages and sprinkler systems
U Type Impeller
Semi – open ( Vortex Impeller )
Produces a vortex ( whirpool effect ) allowing long fibrous materials and other solid waste to pass through, without contact with the impeller.
PERFORMANCE SPEC
Model : F-21U
HP (kW) : 1 ( 0.75 )
Discharge Inch ( mm ) : 3″ ( 80 )
Phase : 1 dan 3
Start Method :
Phase 1 : Capacitor
Phase 3 : Direct
Head : 6.5 m
Capacity : 0.3 m3/min, 18 m3/h
Solid passage : 30 mm
Weight :
1 phase : 18
3 phase : 17
Dimension:
A : 278 mm
B : –
C : 173 mm
D:
1 phase : 457 mm
3 phase : 457 mm
SPECIFICATIONS
| Discharge ( mm ) | 50 . 80 | |
| Limits Of Use | Liquid Temp. | 0 – 40 0C ( 32-104 0F ) |
| Applications | General Wastemeter . | |
| Sewage water and industrial meter | ||
| Submersion Depth | 30m ( 100 feet ) | |
| Type | Frequency | 50 Hz |
| Motor | 2 P ( 3000RPM ) . | |
| Dry motor ( F-05A: Oil Motor ) | ||
| Insulation | Class B | |
| Protection | IP68 | |
| Protector | Auto-cut | |
| ( F-05A 3Ø: none ), | ||
| F-05A/U 1Ø: Overheat | ||
| Bearing | Ball Type | |
| M. seal | Double M. seals (F-05A: Single M.seal ) | |
| Impeller | Semi-open | |
| Material | Upper Cover | FC-200 |
| Motor Frame | SUS304 | |
| Shaft End | SUS410(0.5-1HP) . SUS403 ( 2-3HP) | |
| M. seal | Upper: Carbon/Ceramic | |
| Lower: Silicon/Silicon | ||
| (F-05A: Carbon/Ceramic) | ||
| Casing | FC-200 | |
| Impeller | FC-200 ( F-05A: PA ) | |
| Cable | VCT or H07RN-F or SJOW/SOW | |
| Optional | Pumps can be customized to fit specifications | |
