Descriptions
- SCP-HT pumps are specially designed for hot water and geothermal water application.
- Horizontal, radially split volute casing type, single stage, end suction centrifugal pumps with closed impeller.
- Heavy duty shaft not in contact with the medium handled ( dry shaft )
- For casing sealing, confined gaskets are used to prevent blow-out under pressure.
- Coupling misalignment due to thermal expansions are mainly reduced with centerline mounting design.
- Due to the back-pull-out design, the complete bearing assembly including impeller and casing cover can be dismantled without removing the volute casing from the pipe system.
- Bearings of SCP-HT type pumps are always oil lubricated.
Specifications
Discharge Flange : DN 32 ….DN 250 mm
Capacity : Up to 1500m3/h
Head : Up to 160 m
Speed : Up to 2900 rpm
Operating Temperature : Up to +2300C
Casing Pressure ( Pmax ) : 25 bar ( 40 bar )
Material
Ductile cast iron, steel, stainless steel or duplex.
Shaft Sealing
Soft packing seal or mechanical seal.
Rotation
Direction of rotation is clockwise viewed from drive end.
Certification
CE