Description
- Clean or slightly contaminated low viscosity liquids without solid & fibrous particles.
- Horizontal or vertical manufacturing option. Axial split case, single stage, double suction centrifugal pumps.
- Suction and discharge flanges are on the same axis on the bottom casing. Split case design permits easy disassembly of the rotor group for maintenance or repair without distorting pump alignment and suction / discharge piping.
- Impeller is of double suction design. This feature increases pump suction performance in addition with providing the balance of hydraulic axial firces resulting higher bearing lifes and higher reliability.
- Grease lubricated ball bearings are used in horizontal installation. In case of vertical installation, pimping liquid lubricated journal bearings on bottom and grease lubricated ball bearings on top are used.
Specifications
Discharge Flange : DN 65……DN 600 mm
Capacity : Up to 6000 m/h
Head : Up to 180 m
Speed : Up to 2900 rpm
Operating temperature : -10C’ to +110C
Casing Pressure ( Pmax ) : 16 bar – 25 bar
Material
Cast iron, ductile cast iron, steel, stainless steel, duplex and bronze
Shaft Sealing
Soft packing seal or mechanical seal.
Rotation
Direction of rotation is clockwise viewed from drive end. Upon request disrection of rotation can be reversed.
Certification
EN ISO 9905, CE, ATEX, GOST-R
