Specification product:
Single Phase ( TOP-VORTEX/GM )
Power:
KW: 0.37
HP: 0.50
Flow Rate (Q) = m3/h : Total manometric head = metres
0: 7
1.2: 6.5
2.4: 6
3.6: 5.4
4.8: 4.8
6.0: 4.2
7.2: 3.5
8.4: 3
9.6: 2.5
10.8: 1..5
Flow Rate (Q) = l/min : Total manometric head = metres
0: 7
20: 6.5
40: 6
60: 5.4
80: 4.8
100: 4.2
120: 3.5
140: 3
160: 2.5
180: 1.5
Ports
Outlet: 1 1/4″
Berat: 5.2 kg
PERFORMANCE RANGE
- Flow rate up to 180 l/min (10.8 m³/ h)
- Head up to 8.5 m
APPLICATION LIMITS
- 3 m maximum immersion depth
( with a sufficiently long power cable )
- Maximum liquid temperature +40 °C
( Maximum liquid temperature +90 °C)
for a maximum of 3 minutes intermittent service )
- Passage of suspended solids up to Ø 25 mm
- Suction down to 25 mm above ground level
- Continuous service S1
CONSTRUCTION AND SAFETY STANDARDS
The pumps are complete with;
– 5 m longpower cable
– Float switch
EN 60335-1 EN 60334-1
IEC 60335-1 IEC 60334-1
CEI 61-150 CEI 2-3
CERTIFICATIONS
Company with management system certified DNV ISO 9001 : QUALITY
ISO 14001 : ENVIRONMENT
INSTALLATION AND USE
The TOP-VORTEX pump is suitable for use with dirty water that is not chemically aggressive towards the materials from which the pump is made.
Because of the design solutions that have been adapted such as the complete cooling of the motor and the shaft with double seal, these pumps are easy to use and reliable.
They are suitable for use in applications such as clearing dirty water, emptying tanks, discharging domestic waste water, and for emptying collection traps containing suspended solids up to a maximum of Ø 25 mm.
PATENTS-TRADE-MARKS-MODELS
- Registered EU Design n. 342159-0011
OPTIONS AVAILABLE ON REQUEST
- “TOP-VORTEX/GM”pumps with vertical switch ( suitable for particularly small wells)
- Special mechanical seal
- Pumps with a 10 m long power cable:
=> N.B: Standard EN 60335-2-41 states that the power cable must be 10 m long for outdoor
applications
- other voltages or 6o Hz frequency
